Product Classification: 10 21 13
Sweet’s Catalog Code: 10 21 13/GEN, BuyLine 0080
This screen contains descriptive information for the 30 Series toilet partitions,
as manufactured by General Partitions Mfg. Corp. Open the General Partitions
Showcase presentation at this time to review further information on product
data, services and specifications.
Where no overhead bracing is required, but ceiling heights make the utilization
of ceiling hung partitions impractical, the 30 Series floor supported toilet
partitions are ideal. Modern spaciousness and rigidity are important features.
The 30 Series is also featured in a 54" Junior size which has proved to be valuable
in design for younger children.
Only the finest quality materials are used in the manufacture of "General"
toilet partitions. The 30 Series is available in the following materials:
The economy and durability of baked enamel makes it the popular choice for new
construction or remodeling. Periodic washing with a mild soap and an occasional
waxing with a good automobile wax will keep the finish looking new for years.
General’s Finish is a superior quality polyester enamel applied automatically
by a hot air assisted electrostatic system, baked at 400°F. The exclusive use
of galvanized bonderized steel gives additional protection and enhances adhesion.
General’s exclusive use of type 304 stainless steel polished to a No. 4 Finish
offers the ultimate in partitions. The Finish is protected in the manufacturing
process and in shipping by a P.V.C. film which is removed at the job site. Any
scratches can be removed and the original beauty restored by buffing. Also available
with a Deep Textured surface or a Baked Enamel finish.
General’s High Pressure Plastic Laminate Partitions are available in wood grains
or solid color. High Pressure Laminates meet or exceed NEMA Standards. Standard
Core is particle board and is not recommended for high moisture areas.
Please open General Partitions’ showcase presentation for detailed specifications
for each type of material.
|