Product Classification: 10 21 13
Sweet’s Catalog Code: 10 21 13/GEN, BuyLine 0080
General Partitions’ plastic laminates are available in all styles for
toilet partitions, showers and dressing compartments. Plastic laminate material
is easily cleaned and cannot rust. Dirt, grease and cosmetics do not penetrate
the durable plastic surface which is highly resistant to scratches.
Available Colors - Please refer to the color chart on this screen. Colors available
on Quick Shipment:
1573-60 Frosty White
D30-60 Natural Almond
D331-60 Sand
D337-60 Pebble
D381-60 Fashion Grey
D321-60 Brittany Blue
4142-60 Grey Glace
General Partitions Manufacturing Corporation utilizes a special anchor plug
to attach the extra heavy 1/2" thick pilaster footer. It takes full advantage
of the high compressive strength of the particle board core. This construction
is offered in lieu of steel core, which is not recommended. No additional layers
to be laminated or thinner particle board sheets. Standard Core is particle
board and is not recommended for high moisture areas. For high moisture areas
a plywood core or solid phenolic core should be used. Pilaster is full 1 1/4"
thick. Hardware is through bolted with theft proof bolts for maximum strength.
This construction is guaranteed. (Steel Core Pilasters are available).
Plastic laminate toilet partitions are available with concealed latch operating
handles, which do not require any twisting or turning of the wrist. A gentle
nudge is required to open or close the door.
- All plastic laminate toilet partitions
shall be (indicate one or more style numbers as required): 30, floor supported;
40, floor supported with headrail; 50, ceiling hung; 60, floor to ceiling; as
manufactured by General Partitions Mfg. Corp., Erie, Pennsylvania.
- Shall be 1" finish thickness
with faces and edging 1/16" general purpose laminated plastic. Bonded under
pressure to a solid 45 lb. density particle board core assuring a rigid permanent
bond.
- Pilasters - Shall be 1 1/4" finish
thickness with faces and edging 1/16" general purpose laminated plastic. Same
construction as panel specification outlined above. Pilasters are to be anchored
to floor with standard 3/8" threaded rod, hex nuts and washers to provide vertical
adjustment and necessary strength.
- Pilasters - Shall be 1 1/4" finish
thickness with faces and edging 1/16" general purpose laminated plastic. Same
construction as panel specification outlined above. Pilasters are to be anchored
to floor with heavy gauge angle. Top of pilasters to be securely braced with
extruded aluminum headrail with integral crown loafer rail.
- To be 1 7/8" x 1 5/32" x 1/16"
with integral crown loafer rail, extruded aluminum heat-treated and anodized
with necessary fittings.
- Pilasters - Shall be 1 1/4" finish
thickness with faces and edging 1/16" general purpose laminated plastic. Same
construction as panel specification outlined above. Pilasters are to be anchored
to overhead member (which member is to be supplied by others) with standard
3/8" threaded rod, hex nuts and washers to provide vertical adjustment and necessary
strength.
- Pilasters - Shall be 1 1/4" finish
thickness with faces and edging 1/16" general purpose laminated plastic. Same
construction as panel specification outlined above. Pilasters are to be anchored
to floor and ceiling with heavy gauge angle.
- Concealed latch (No. 2000PL),
coat hooks (No. 6200D), hinge brackets (No. 1250PL), and door stop and keeper
(No. 2060PL) heavy castings non-ferrous alloy, chrome-plated. Concealed hinge
(No. 1000PL), works on opposing nylon cams under spring tension. Top pivot pin,
mounted within door having bearing points above and below hinge bracket.
- Wall connection brackets for panels
and pilasters to be high strength heavy chrome plated. Pilaster trim to be 3"
high, .031 stainless steel. All hardware and fittings to be secured with chrome-plated
one-way vandal-proof sex bolts or No. 14 plated-steel metal screws of proper
lengths.
|