OP-OVERALL PRODUCT
Materials: Only the finest quality materials are used in manufacture of "General" toilet partitions, dressing compartments and showers.  

• BAKED ENAMEL (BE)
  General’s Baked Enamel on Galvanized-Bonderized Steel is available in all styles for toilet partitions, showers and dressing compartments. The economy and durability of baked enamel makes it the popular choice for new construction or remodeling. Periodic washing with a mild soap and an occasional waxing with a good automobile wax will keep the finish looking new for years.

General’s Finish is a superior quality polyester enamel applied automatically by a hot air assisted electrostatic system. Baked at 400°F. The exclusive use of galvanized bonderized steel gives additional protection and enhances adhesion. The finish shall meet or exceed the following.

• Humidity 100% @ 100°F 1000 hrs.
• Salt Spray 20% @ 100°F 300 hrs.
• Water Soak @ 100°F 1000 hrs.
• Hardness 2 H. min.

• STAINLESS STEEL (SS)
  General’s exclusive use of type 304 stainless steel polished to a No. 4 Finish offers the ultimate in partitions. The Finish is protected in the manufacturing process and in shipping by a P.V.C. film which is removed at the job site. Any scratches can be removed and the original beauty restored by buffing. Also available with a Deep Textured surface or a Baked Enamel finish.

• PLASTIC LAMINATES (PL)
  General’s High Pressure Plastic Laminate Partitions are available in wood grains or solid color. High Pressure Laminates meet or exceed NEMA Standards.
  Standard Core is particle board and is not recommended for high moisture areas. For high moisture areas a plywood core of solid phenolic core should be used.

• F.R.P. (Fiberglass Reinforced Plastic)
  We are proud to introduce a revolutionary new material to the partition market. We start with a highly durable, graffiti resistant FRP surface, and bond it to a solid wood core. The partition corners are then rounded and the edges are bull-nosed and finally coated with a hard poly-edge coating. The final product is a tough, stain-resistant partition system that will not dent, rust, corrode or delaminate. PANELAM™ is excellent for use in schools, rest stops, restaurants, and any other high traffic area.

• H.D.P. (High Density Plastic)
  General's H.D.P. toilet partitions, showers and dressing compartments are manufactured using high density polymer resin. Color is solid thru-out. Compartments cannot rust, rot, de-laminate or absorb odors like marble. Surface has a beautiful orange peel finish to help prevent scratches. Completely water resistant, can be used under any moisture condition. Perfect for shower and dressing compartments as well as toilet partitions.

• S.P.C. (Solid Phenolic Core)
  General’s S.P.C. toilet partitions, showers and dressing compartments are fabricated of solid phenolic core. Solid Phenolic Core Panels are composed of melamine-impregnated decorative surface papers superimposed over a varying number of kraft phenolic core sheets to achieve a desired thickness. To form a one piece unit which will not delaminate; edges are dark brown or black solid phenolic resin. Completely water resistant, impervious to steam, soaps and detergents and will not mildew.