Product Classification: 10 21 13
Sweet’s Catalog Code: 10 21 13/GEN, BuyLine 0080
This screen contains descriptive information for the Eastern Series toilet partitions,
as manufactured by General Partitions Mfg. Corp. Open the General Partitions
Showcase presentation at this time to review further information on product
data, services and specifications.
General Partitions Mfg. Corp. recommends the Eastern Series toilet partitions
for an increased level of privacy and security. The partitions feature doors
and panels which are 67" high, mounted 3" above finish floor. A sight seal is
available to close the openings between the door and pilaster for complete privacy.
The Eastern Series is available in the following styles: Series 30-Floor Supported,
Series 40-Floor Supported With Headrail and Series 60-Floor to Ceiling.
Only the finest quality materials are used in the manufacture of "General"
toilet partitions. The Eastern Series is available in the following materials:
The economy and durability of baked enamel makes it the popular choice for new
construction or remodeling. Periodic washing with a mild soap and an occasional
waxing with a good automobile wax will keep the finish looking new for years.
General’s Finish is a superior quality polyester enamel applied automatically
by a hot air assisted electrostatic system, baked at 400°F. The exclusive use
of galvanized bonderized steel gives additional protection and enhances adhesion.
General’s exclusive use of type 304 stainless steel polished to a No.
4 Finish offers the ultimate in partitions. The Finish is protected in the manufacturing
process and in shipping by a P.V.C. film which is removed at the job site. Any
scratches can be removed and the original beauty restored by buffing. Also available
with a Deep Textured surface or a Baked Enamel finish.
General’s High Pressure Plastic Laminate Partitions are available in wood
grains or solid color. High Pressure Laminates meet or exceed NEMA Standards.
Standard Core is particle board and is not recommended for high moisture areas.
For high moisture areas a plywood core or solid phenolic core should be used.
Solid Phenolic Core Panels are composed of melamine-impregnated decorative surface
papers superimposed over a varying number of kraft phenolic core sheets to achieve
a desired thickness. To form a one piece unit which will not delaminate; edges
are dark brown or black solid phenolic resin. Completely water resistant, impervious
to steam, soaps and detergents and will not mildew.
Please open General Partitions’ showcase presentation for detailed specifications
for each type of material.
|