GAF Materials Corporation
1361 Alps Road
Wayne, NJ 07470
Tel: (800) 766-3411
Web site: http://www.gaf.com
Product Data Sheet
EverGuard® TPO
TSR - 80 Membrane
GAF EverGuard ® TSR-80 thermoplastic polyolefin single-ply membrane
systems have been engineered to provide superior long-term performance
and enhanced durability. Strong, flexible EverGuard TSR-80 membrane is
suitable for use in all types of single-ply systems:
• Mechanically Attached
• Fully Adhered
• Ballast Applied
Compared to other heavy-duty single-ply EPDM, PVC and TPO membranes, GAF
EverGuard TSR-80 roofing membrane provides the benefits of all three materials
in a single membrane:
| System Type |
Main Benefits |
EverGuard TPO Membrane |
| EPDM |
Low Installed Cost |
Yes |
| PVC |
Heat Welded Seams, White Reflective Color |
Yes |
| TPO |
No Liquid Plasticizers, Tear/Puncture Resistance |
Yes |
Additional features and benefits of GAF EverGuard TSR-80 roofing
membrane include:
| Advanced formulation |
• No liquid plasticizers means no concerns about plasticizer
migration and related long-term sheet brittleness. |
| Super-wide 120" membrane sheets |
• Wider sheets allow faster roof system installation when compared
to both "tab-type" systems that provide a securement tab every 50" - 60",
and conventional systems with sheets that are only 70" - 80" wide. |
| Resistant to chemicals, oils and grease |
• Allows installation on industrial applications, restaurants,
etc. where chemical, oil and grease contamination would deteriorate typical
PVC and EPDM membranes.* |
| Heat-welded seams |
• Heat-welded seams provide superior tensile and peel strength
as well as superior long-term performance when compared to taped or glued
EPDM membrane seams. |
| Strong polyester scrim reinforcement |
• Heat-stabilized, weft inserted polyester scrim reinforcement
provides excellent resistance to punctures and tears. |
| Standard reflective white color |
• Energy-efficient white membrane reflects significantly more
solar radiation than do typical black EPDM membranes, reducing heat load.
Also available in gray and tan. |
| FM/UL approvals |
• Competitive FM/UL roof system approvals are available for installation
over both noncombustible and combustible roof decks. |
| Single-source responsibility |
• All materials, including membrane, flashing, insulation, fasteners,
and accessories, are included in standard guarantee coverage, both NDL
and Dollar Per Square guarantees. |
| Proven performance |
• In-field installations in all regions of the U.S. |
*Damage resulting from oil, grease, or chemicals is not covered under
EverGuard guarantee or limited warranty against manufacturing defects.
Product Data Sheet
EverGuard® TPO
TSR - 80 Membrane
| Physical Properties |
ASTM Test Method |
ASTM Draft Standard
Proposed Minimum |
EverGuard Test Data |
1. Certain data is provided in MD (machine direction) x CMD (cross machine
direction) format.
2. Data is based upon typical product performance, and is subject to
normal manufacturing tolerance and variance
| Nominal Thickness |
ASTM D-751 |
0.039" |
0.080" |
| Breaking Strength |
ASTM D-751 Grab Method |
245 lbf/in. |
310 lbf x 300 lbf |
| Seam Strength |
ASTM D-751 |
75 lb. |
110 lb. |
| Elongation at Break |
ASTM D-751 |
25% |
30% |
| Heat Aging |
ASTM D-573 |
90% Retention of Breaking Strength and Elongation at Break |
100% |
| Tear Strength |
ASTM D-751 8" x 8" Sample |
57 lbf |
60 lbf x 130 lbf |
| Puncture Resistance |
FTM 101B Method 2031 |
Not Established |
>380 lbs. |
| Cold Brittleness |
ASTM D-2137 |
Not Established |
-40° C |
| Permeance |
ASTM E-96 |
Not Established |
0.2 Perms |
| Dimensional Change |
ASTM D-1204 @158° F, 6 hrs. |
Not Established |
0.4% |
| Water Absorption |
ASTM D-471 @158° F, 1 week |
Not Established |
0.7% |
| Hydrostatic Resistance |
ASTM D-751Method D |
Not Established |
>430 psi |
| Ozone Resistance |
ASTM D-1149 |
Not Established |
No visible deterioration @ 7 x magnification |
Shipping, Packaging and Handling Information
| Roll Size |
Note: Product sizes, dimensions, and widths are nominal
values and are subject to normal manufacturing/packaging tolerance and
variation |
| Product |
Full Roll Size |
Full Roll Weight |
Half Roll Size |
Half Roll Weight |
| TSR-80 |
10' x 100'
(1,000 sq.ft.) |
340 lbs. |
5' x 100'
(500 sq.ft.) |
170 lbs. |
| Packaging |
Note: Membrane rolls shipped horizontally on pallets. Stacked
pyramid-style and banded |
| Product |
Full Rolls
Per Pallet |
Full Roll
Pallet Weight |
Half Rolls
Per Pallet |
Half Roll
Pallet Weight |
| TSR-80 |
7 |
2380 lbs. |
7 |
1190 lbs. |
| Storage |
Store rolls on their sides on pallets or shelving in a
dry area |
| Installation Tips |
Membrane rolls are heavy, and are best positioned and installed
by at least two workers. |