The McGraw-Hill Companies
McGraw Hill Construction - Building Materials, Products and Manufacturers
home |
product centers
 | find a rep |
utilities
 | education | project network | SNAP Reader Service | forums
register | forgot password | remember me | help
 
MasterFormat 2004   help
 
Product Center Image
minus gif view products
 |   |   | 


GAF Materials Corporation
1361 Alps Road
Wayne, NJ 07470
Toll-Free: (800) 766-3411
Web site: http://www.gaf.com

Product Data Sheet
EverGuard® PVC
Flashing Accessories

The GAF EverGuard® PVC single-ply roofing system includes an extensive line of EverGuard PVC flashing accessories for use with EverGuard PVC roofing materials. EverGuard flashing accessories are heat welded to the EverGuard roofing and flashing membrane. They are easy to install and provide secure protection from roof edge to parapet to penetration to wall. The following EverGuard PVC flashing accessories are available in standard colors of white and gray:
 
 

Product Description Benefit/Application
Preformed Vent Boots .075" thick molded membrane • Two standard sizes accommodate most common pipe and conduit, including square tube.
• Heat welds directly to roofing membrane.
• Supplied with stainless steel clamping rings.
Preformed Corners .075" thick molded membrane • Universal style accommodates both inside and outside corners of base and curb flashing.
• Heat welds directly to roofing membrane.
Prefabricated Expansion Joint Covers .060" thick reinforced membrane with foam-supported bellows • Two standard sizes to accommodate most common joint widths.
• Standard 50 ft. continuous length minimizes joints.
• Equipped with metal nailing flanges and membrane welding flaps.
• Universal style suitable for both field and wall expansion joint in both flat-mounted and curb-mounted styles.
• Heat welds directly to roofing membrane.
• Factory-fabricated terminations and transitions available.
UN-55 Detailing Membrane .055" thick unreinforced membrane • Alternative flashing/reinforcing material for penetrations and corners.
• Required whenever preformed vent boots cannot be used.
• Heat welds directly to roofing membrane.
EGSR-40 Utility Flashing Strips .040" thick reinforced membrane • Membrane cover strips over coated metal joints.
• Cover strips over end lap joints of fleece-backed membrane.
• Stripping-in of coated metal flanges.
• General repairs.
UN-40 T-Joint Cover Patches .040" thick unreinforced membrane • Conforming membrane seal over T-joints in .080" membrane applications
Coated Metal Sheet 25 gauge steel laminated to .020" thick membrane film • Membrane laminated to galvanized sheet metal.
• Cuts and forms like standard sheet metal.
• Roofing and flashing membrane heat welds directly to coated metal.
• Suitable for metal gravel stop and drip edge profiles, metal base and curb flashings, sealant pans, and scupper sleeves.
Walkway Pads and Rolls 1/8" thick extruded and embossed PVC • Available in 30" x 36" pads and 30" x 50’ rolls.
• Herringbone traction surfacing.
• Heat welds directly to roofing membrane.
• Safety Yellow and Gray colors.
Drain Inserts Rigid molded PVC • Available for 3", 4", 5", and 6" drains.
• Complete with clamping ring and strainer basket.
• Roofing membrane heat welds directly to drain insert flange.
• Sealant ring at base of insert tube.
• White drain body with gray plastic strainer.

Product Data Sheet
EverGuard® PVC
Flashing Accessories

Shipping, Packaging and Handling Information
 
 

Note: Product sizes, dimensions, and widths are nominal values and are subject to normal manufacturing/packaging tolerance and variation
Preformed Vent Boots - small Quantity
6 Vent Boots per Carton		 Boot Size
1" - 4" Diameter Pipes		 Carton Weight
9 lbs.
Preformed Vent Boots - large Quantity
6 Vent Boots per Carton		 Boot Size
4" - 8" Diameter Pipes		 CartonWeight
9 lbs.
Preformed Corners Quantity
5 Pieces (20 corners) per Carton		 Corner Size
4" x 4" with 4" Flange		 Carton Weight
9 lbs.
Expansion Joint Covers - small  Quantity
50 ft. Continuous Roll		 Cover Size
4" Bellows for 1 - 2" Joint Width		 Carton Weight
50 lbs.
Expansion Joint Covers - large Quantity
50 ft. Continuous Roll		 Cover Size
6" Bellows for 2" - 3" Joint Width		 Carton Weight
75 lbs.
UN-55 Unreinforced
Detailing Membrane		 Quantity
Roll		 Roll Size
24" x 30' Roll		 Roll Weight
25 lbs.
EGSR-40 Reinforced 
Flashing Strips		 Quantity
Roll 		 Roll Size
8" x 108' Roll		 Roll Weight
21 lbs.
UN-40 T-Joint Cover Patches Quantity
100 T-joint patches per Carton 		 Patch Size
4" x 4" Patch		 Carton Weight
4 lbs.
Coated Metal Flashing Sheet Size
4' x 10'		 Sheet Weight
47 lbs.		 Sheets per Pallet
10 or 30 Sheets
Walkway Pads Quantity
1 Pad		 Pad Size
30" x 36"		 Pad Weight
8 lbs.
Walkway Rolls Quantity
1 Roll		 Roll Size
30" x 50’		 Roll Weight
118 lbs.
Drain Inserts Quantity
1 Insert 		 Drain Size
3", 4", 5", and 6" Diameter 		 Carton Weight
10 lbs. ave.
Storage Store accessory flashing materials in original cartons, rolls or sheets on pallets or shelving in a dry area

 
 
 
 
 
 
 
 
 
 
 

 |   |   |