PROJECT: Pinnacle Bank North
LOCATION: Lincoln, NE
ARCHITECT: Michael S. Bott & Assoc., P.A.
GENERAL CONTRACTOR: Cheever Construction Co.
CONTRACTOR: Lohmeier Construction Inc.
MATERIALS: UNA-CLAD^® UC-2 Snap-On Batten, 22 Gauge Steel, Hylar 5000^™/ Kynar 500^® finish by Valspar

The UNA-CLAD^® UC-2 is a Snap-On Batten roofing system that allows a distinct look to enhance the architect’s design while meeting current wind-load designs for architectural metal roofing. Concealed fasteners and hold-down clips allow for freedom of movement for thermal expansion and contraction. It is recommended that UC-2 panels be installed over a solid substrate such as plywood with an underlayment of 30# felt. Panels for mansard canopy installation may utilize open framing systems. The UC-2 roofing system is available in 22, 24, and 26 gauge painted galvanized steel, .032 and .040 painted or anodized aluminum, and 16 oz. and 20 oz. Architectural Grade Sheet Copper. Heavier gauges, narrower widths, and embossing minimize oil canning.

Note: Oil canning is not a cause for rejection.

Features and benefits

• UL 90 rated in a wide variety of substrates
• ASTM E283-91 air infiltration
• ASTM E330-90 structural performance
• ASTM E331-96 water penetration
• ASTM E1646-95 water penetration
• ASTM E1680-95 air leakage
• UL 263 & UL 790 class A fire rating
• UL 2218 class 4 hail rating
• Load/Span charts available