EXCEL DRYER, Inc.
357 Chestnut Street
P.O. Box 365
East Longmeadow, MA 01028
Tel: (413) 525-4531
Fax: (413) 525-2853
E-mail: sales@exceldryer.com
Web site: http://www.exceldryer.com

XLERATOR^®
Finally... A Fast Hand Dryer. Zero To Dry In Less Than 15 Seconds.

Excel’s research team has developed the XLERATOR^® with patented technology that delivers 3-times-faster hand drying performance. Conventional hand dryers take from 30 to 45 seconds to get a user’s hands totally dry. With  XLERATOR, not only do your hands get dry in 10-15 seconds, consumer test participants also report that their hands felt warm, soft and really dry.

FEATURES

Zero To Dry In Less Than 15 Seconds • Uses 80% Less Energy • 90% Cost Savings vs. Paper Towels • Source Reduction Alternative • Promotes Hygiene

SPECIFICATIONS

Dimensions: 11 3/4" LG. X 12 11/16" HIGH X 6 11/16" DEEP (298 MM LG. X 322 MM HIGH X 170 MM DEEP)
Weight: 16 LBS. (7.3 KGS.)

Construction
A. Cover shall be a one-piece, heavy-duty, rib-reinforced, die-cast zinc alloy. It shall be lightweight, unbreakable, rustproof and all exposed surfaces shall be bright chrome plated or finished with chip-proof, electrostatically applied epoxy paint and fastened to a wall plate by two chrome plated tamper-proof bolts.
B. Wall plate shall be equipped with (3) 7/8" (22 mm) diameter holes, one of which shall be suitable for use with surface conduit, for ease of wiring.
C. All internal parts shall be coated according to Underwriters' Laboratories, Inc. requirements.
D. Entire mechanism shall be internally grounded.

Mechanism
A. Motor shall be a series commutated through-flow discharge vacuum motor/blower (5/8 HP / 20,000 RPM) which provides air velocity of 16,000 LFM (linear feet per minute) at the air outlet and 14,000 LFM at the hands (4 inches [102 mm] below air outlet).
B. Heating element (900 W) is constructed of Nichrome wire and mounted inside the blower housing, thereby being vandal proof. It shall be protected by an automatic resetting thermostat, which shall open whenever air flow is cut off and shall close when flow of air is resumed. It shall produce an air temperature of up to 135°F (57°C) at a 72°F (22°C) ambient room temperature at the hands (4 inches [102 mm] below air outlet).
C. Control assembly is activated by an infrared optical sensor located next to the air outlet. The dryer shall operate as long as hands are under the air outlet. There is a 35-second lockout feature if hands are not removed.

Limited Warranty
The dryer shall be guaranteed to be free from defects for a period of three (3) years. Warranty shall include factory performed labor as well as the repair or exchange of defective parts, at manufacturer's option.

UNITS ARE AVAILABLE AS SPECIFIED IN:

Suggested Mounting Heights From floor to Bottom of Dryer