EXCEL DRYER, Inc.
357 Chestnut Street
P.O. Box 365
East Longmeadow, MA 01028
Tel: (413) 525-4531
Fax: (413) 525-2853
E-mail: sales@exceldryer.com
Web site: http://www.exceldryer.com

AUTOMATIC SENSOR ACTIVATED HAND DRYERS

Excel’s Hands Off^® hand dryers provide exceptionally quiet operation with maximum strength and durability. Performance is backed by a 10 Year Limited Warranty on the dryer (3 years on control assembly and sensor). Surface mounting or recessed wall mounting options are available.
FEATURES

• Fully Automatic - Dryers are activated by an infrared sensor when hands are placed under the air outlet.
• Hands Off^® dryers utilize a maintenance-free brushless motor, capacitor initiated for quick starts.
• Vandal-Proof - features include tamper proof bolts and a side mounted heating element which makes the heating element inaccessible through the air outlet.
• Dryer covers are available in either a white epoxy paint or chrome plated finish
• Custom Colors are also available.

Construction
A. Dryer Cover HO-IW & HO-IC Models: shall be one piece, heavy-duty, rib-reinforced die-cast zinc alloy. It shall be lightweight, unbreakable, rustproof and all exposed surfaces shall be bright chrome plated or finished with chip-proof, electrostatically applied epoxy, and fastened by two chrome plated tamper-proof bolts to a cast zinc alloy wall plate.
R76-IW & R76-IC Models: shall be one piece, heavy-duty, rib-reinforced die-cast zinc alloy. It shall be lightweight, unbreakable, rustproof and all exposed surfaces shall be bright chrome plated or finished with chip-proof, electrostatically-applied epoxy, fitted with a fixed, die-cast, chrome plated, zinc alloy nozzle.
B. The wall plates for surface mounted models shall be equipped with (3) 7/8" (22 mm) diameter holes one of which shall be suitable for use with surface conduit, for ease of wiring.
Recessed covers shall be fastened by four flat-head, recessed, tamper-proof bolts to wall box. Wall plate shall be fastened to the wall box by four concealed 1/4" (6mm) mounting bolts, and shall be equipped with two knockouts for ease of wiring.
C. HO-IW & HO-IC Models: shall have a chrome plated, die-cast zinc air outlet which shall be fixed to the blower housing and shall be of a design that will not allow foreign objects to enter the dryer.
R76-IW & R76-IC Models: shall be equipped with an air inlet opening on the bottom of the casting and covered with a vandal resistant metal protective grill to prevent the entry of foreign objects. A fixed chrome plated, die-cast zinc air outlet nozzle on the front of the cover shall permit a full flow of warm air when in operation, and shall be protected by a cast alloy grating fixed into the blower housing.
D. All internal parts shall be coated according to Underwriters’ Laboratories, Inc. requirements.
E. Entire mechanism shall be internally grounded.

Underwriters’ Laboratories, Inc. Listed
The entire dryer shall be listed under the re-examination service of Underwriters’ Laboratories, Inc.

Mechanism
A. Motor shall be capacitor-initiated, brushless type (for longer life and quiet operation) 1/10 H.P., 3450 R.P.M. with self-lubricated bearings. It shall be insulated by a resilient mounting, and shall be protected by a self-resetting thermal switch.
B. Fan shall be a large, single inlet centrifugal type for maximum capacity, and shall deliver 180 C.F.M. Fan shall be mounted directly on the motor shaft, and fan and motor unit shall be insulated from dryer with a resilient rubber mounting to obtain maximum dampen ing effect.
C. The heating element is constructed of Nichrome wire and side mounted on the blower housing, thereby being vandal proof. It shall be protected by an automatic resetting thermostat, which shall open whenever air flow is cut off and shall close when flow of air is resumed. It shall produce an air temperature of 145°F/63°C at a 72°F/22°C ambient room temperature at the outlet.
D. The control assembly is activated by an infrared optical sensor located next to the air outlet. The dryer shall operate as long as hands are moving under the air outlet. There is a 90 second lockout feature, if hands are not removed.

Limited Warranty
The dryer shall be guaranteed to be free from defects for a period of ten years, except for three years on the control assembly and sensor. Warranty shall include factory performed labor as well as the repair or exchange of defective parts, at manufacturer’s option.

Suggested Mounting Heights from Floor to Bottom of Dryer

All units are available as specified in: 110/120V 15 or 20 Amp. 60 Hz, 208/230V 10 Amp. 60 Hz, 277V 8 Amp. 60 Hz. (up to 2400 Watts).
50 Hz units are available for export.