Metal Roofing Englert Series 2400

Englert, Inc.
1200 Amboy Avenue
P.O. Box 149
Perth Amboy, NJ 08861
Tel: (732) 826-8614
Fax: (732) 826-8865
Email: englert.inc@prodigy.net
Web site: http://www.englertinc.net

PRODUCT PRESENTATION

Englert Series 2400 2" high seam is a variable width (12" to 24") roof panel system rollformed with optional stiffening ribs, with clip offset feature. The panels are secured by fixed or floating clips, allowing for unrestricted thermal movement and seamed by electric seamers. The 2" high seam panel features an anticapillary hem. All fasteners are concealed. (On 2400 2" high panels going over purlins, anchor clips at every purlin with 2 fasteners per clip.)

As an integrated roofing system, 2" high seam, minimum slope is 1/2"/12" for panels up to 75' long and 1"/12" for panels over 75'-100' long with sealant. Check with the manufacturer for specific applications. 2400, 2" high 18" panel system meets the structural requirements of UL for Class 90 wind uplift resistance at 4' o.c. over 16 gauge purlins. Check with the manufacturer for specific details on UL-90 ratings.

SPECIFICATIONS

A. Panel system should be the Englert Series 2400, 2" seam x 18" wide panel Structural Standing Seam System, (with pencil ribs and 2 mechanically seamed styles available). Mechanical seaming available in 90° and 180°. The panels shall have baked on finish as specified in Section 2.05 hereunder, in Manufacturer’s standard colors. Manufacturer shall offer at least a minimum of 23 standard colors to choose from.

B. Substrate

- 24 gauge baked on finish over Galvalume ASTM A-792-83, AZ55, 40 KSI yield point, 52 KSI tensile strength.
- *22 gauge baked on finish over Galvalume per ASTM A-792-83, AZ55, 40 KSI yield point, 52 KSI tensile strength.
- *.032" or .040" aluminum alloy 3105-H14 approved equal.
NOTE TO SPECIFIER: *22 gauge steel, and .032" and .040" aluminum are available subject to minimum order requirements. Call Englert for details.

C. Performance

1. Panel shall meet the requirements of Underwriters Laboratories, Inc. for Class 90 wind uplift resistance.
2. ASTM E-283-84 air infiltration: Maximum of 0.003 CFM./Ft² at 10 psf pressure differential on 180° seamed profile and 0.006 CFM./Ft² at 20 psf pressure differential.
3. ASTM E-331-84 water penetration: No evidence of uncontrolled leakage on 180° seamed panel at 20 psf pressure differential.
4. Panel shall display a flame spread classification of a Class 1 when tested in accordance with ASTM E-84-87.
NOTE TO SPECIFIER: Series 2400 panels 2" x 18" wide in 24 gauge Galvalume meet the Underwriters Laboratories, Inc. 580 classification for 90 lb. per square foot up lift test when installed over purlins at 4'0" o.c. with special clips.

Englert, Inc.
1200 Amboy Avenue
P.O. Box 149
Perth Amboy, NJ 08861
Tel: (732) 826-8614
Fax: (732) 826-8865
Email: englert.inc@prodigy.net
Web site: http://www.englertinc.net

Englert, Inc.

Colorado
Phone: (303) 288-8070

Connecticut
Phone: (203) 265-6704

Florida
Phone: (813) 248-2296

Massachusetts
Phone: (508) 774-0006

New Jersey
Phone: (732) 826-8610

Pennsylvania
Phone: (412) 461-1355

Tennessee
Phone: (423) 970-0090

Virginia
Phone: (703) 922-9666
(757) 363-0622