|   |   | 

SHELVES

Shelves

E-Z GALVANIZED STEEL SHELVING

Features
  • Open Front 100% usable shelf surface
  • Custom-fit wall-to-wall at no extra charge; shelf depths 6 - 36 in.
  • The design freedom to combine multiple depths in a single shelving system
  • 30 - 36" depths for desks, work-benches, laboratory countertops
  • Infinite shelf height adjustability; Plus run shelving right up to the ceiling
  • Heavy Duty - Check our "Load Carrying" Capacity Charts
  • Alternate knob brackets to accept most brands of 4-post wire shelving
  • Galvanized/zinc, stainless steel, aluminum, and epoxy powder-coated finishes are available
  • Institutional Grade, without the institutional look
  • Constructed of 16 gauge G-90, LFQ, ASTM A653 galvanized sheet, with front and rear edges flanged in two directions to provide structural rigidity, and to withstand shelf failure.
  • NSF® listed, USDA-approved. Meets U.S. Military standards

STANDARD SHELF LENGTHS ARE: 36", 48" AND 60". However, shelves of virtually any length can be fabricated allowing a "glove fit" regardless of room size and without an extra "custom" charge. AVAILABLE SHELF DEPTHS ARE AS FOLLOWS:

EZGS 6" x length
EZGS 8" x length
EZGS 10" x length
EZGS 12" x length
EZGS 14" x length
EZGS 16" x length
EZGS 18" x length
EZGS 20" x length
EZGS 22" x length
EZGS 24" x length
EZGS 26" x length
EZGS 28" x length
EZGS 30" x length

OPTIONAL SHELF MATERIALS ARE: 18 gauge, Stainless steel, series #304, and .080 Aluminum, series #5052. Consult price list for NSF and stainless steel and aluminum shelf designation.

E-Z PAINTED FINISH (EZPS)
GALVANIZED OR COLD ROLLED STEEL SHELVING

16 gauge heavy-duty phosphate primed steel, shall be coated with either a rugged electrostatically applied epoxy powder coating, or durable two component aliphatic polyurethane paint system. Standard Universal colors: White, Tan, Gray and Black.

Custom colors available upon request.

TECHNICAL DATA
HARDNESS: 2H tested in accordance with ASTM D3363.
FLEXIBILITY: Passes [1/8 inch] [3 mm] conical mandrel tested in accordance with ASTM D522.
IMPACT RESISTANCE:: 160/160 direct and reverse tested in accordance with ASTM D2794.
TENSILE STRENGTH: [5,300 PSI.] [373 kg per square centimeter.]
ELONGATION: 3 percent.

E-Z SHELVING SYSTEMS, INC.
5538 Merriam Drive
Merriam, KS 66203
Tel: (913) 384-1331
Fax: (913) 384-3399
Tollfree: (800) 353-1331
E-mail: info@e-zshelving.com
Web site: http://www.e-zshelving.com
 |   |   |