DUR-A-GLAZE #4

DESCRIPTION

DUR-A-GLAZE #4 is a name given to a group of clear two-component 100% thermosetting epoxies designed specifically for flooring applications such as Dur-A-Quartz, Shop Floor, Dur-A-Crete and Dur-A-Crete with Q28. When the hardener (A) and resin (B) are combined an irreversible chemical reaction occurs that solidifies these specially prepared resins into an extremely tough and chemical resistant coating or aggregate binder. Although it cures into a very hard solid it does not become "brittle" like glass but retains a sufficient amount of resilience to withstand impact and vibration. Dur-A-Glaze #4 is the most advanced formulation of its kind. ASTM tests prove its superiority, professional applicators acclaim its ease of use.

BENEFITS
– Excellent Clarity
– Ample Pot Life
– No Odor
– Versatile Usage
– Easy Mix Ratio 2:1
– Tenacious Bonding Quality
– Special Purpose Formulations
– Easy to Use Viscosity

TYPICAL USES
The versatility of DUR-A-GLAZE #4 simplifies installation of all Dur-A-Flex seamless floors because it is used as the Prime Coat, a Base Coat (Aggregate Binder) and as a Top Coat. It also serves as an excellent high build, clear, stand alone coating or an extremely strong binder to form a patching mixture to be used underneath Dur-A-Flex coating and flooring systems.

PHYSICAL PROPERTIES
(See table on this screen.)

DUR-A-GLAZE #4 "SPECIAL PURPOSE" FORMULATIONS
(See table on this screen.)

NOTE: Pot life is longer at lower temperatures, shorter at higher temperatures. Working time is extended when blended resins are poured on floor, when solvent is added or when they are combined with an aggregate to form a troweling mixture.

USES FOR "SPECIAL PURPOSE" DUR-A-GLAZE #4
Dur-A-Glaze #4 "U.V." – For areas exposed to sunlight or high intensity fluorescent light.
Dur-A-Glaze #4 "Cold Cure" – For cold area applications when temperature can not be maintained over 50°F, and when a more rapid cure is required at normal temperatures.
Dur-A-Glaze #4 "Fast" – For quick turn around time in most cool to room temperature areas.
Dur-A-Glaze #4 "Water Clear" – Ideal for topcoating quartz floors. Has excellent color retention. May be used in warm temperatures when longer pot life is required.
Dur-A-Glaze #4 "Damp Primer" – For use as a Prime Coat or a Base Coat on new or freshly acid etched concrete or when a surface cannot be dried thoroughly.

CHEMICAL RESISTANCE
(See table on this screen.)

CAUTION
Dur-A-Glaze #4 contains epoxy resins and hardeners that may irritate sensitive skin. Wear protective gloves and eye shields. If contact occurs, wash hands with soap and water, flush eyes with clear water for 15 minutes and contact a physician for advice. Provide adequate ventilation during application. Avoid breathing fumes if exotherm occurs. KEEP OUT OF REACH OF CHILDREN.

Before using any Dur-A-Flex, Inc. product, be sure the Material Safety Data Sheet is read and understood.

Dur-A-Flex, Inc.
95 Goodwin St.
East Hartford, CT 06108
Phone: 860 528-9838
Toll Free: 800 253-3539
Fax: 860 528-2802
Email: info@dur-a-flex.com
Website: www.dur-a-flex.com