DUR-A-CRETE INDUSTRIAL FLOORING

DESCRIPTION

DUR-A-CRETE INDUSTRIAL FLOORING is a 1/4"-3/16" heavy duty, trowel applied, seamless floor topping composed of specially formulated two-component 100% solids epoxy resins and specially graded colored sand aggregate. DUR-A-CRETE INDUSTRIAL FLOORING is ideally suited for use where OSHA, USDA, FDA and EPA standards must be met. It is designed to protect new floors from chemical deterioration and industrial abuse, and to repair deteriorated floors into a better than new condition. It is customarily applied at 1/4" thickness but can be applied as thick as necessary to fill and level an eroded or spalled concrete floor.

BENEFITS
– Easy to Use
– Long Working Time
– Easy to Trowel
– Rapid Hardening Time Means Short Downtime
– No Odor
– Can Be Non-Skid or Smooth Texture

TYPICAL USES
– Machine Shops
– Loading Docks
– Ramps
– Warehouses
– Chemical Plants
– Meat Packing Plants
– Commercial Kitchens
– Dairies
– Cheese Plants
– Walk-in Coolers
– Poultry Processing
– Vegetable Processing
– Supermarkets
– Sugar Refineries
– Laboratories

COLORS
Standard colors are gray and red.

CURE TIMES
8 – 10 hours for foot traffic, 24 hours for heavier service, 72 hours for chemical spillage.

PHYSICAL PROPERTIES
(See table on this screen.)

Before using any Dur-A-Flex, Inc. product, be sure the Material Safety Data Sheet is read and understood.

Dur-A-Flex, Inc.
95 Goodwin St.
East Hartford, CT 06108
Phone: 860 528-9838
Toll Free: 800 253-3539
Fax: 860 528-2802
Email: info@dur-a-flex.com
Website: www.dur-a-flex.com