FlexShade Hardware OptionsMounting Brackets, Endcaps - For wall, ceiling or jamb installation. Optional white bracket cover available for 1-5/8" bracket. Endcaps, not brackets, are supplied with optional fascia and headbox. Depending on type of shade, either headbox, brackets or endcaps are standard. Fascia - Extruded fascia hides hardware and roller. May be mounted inside or outside with matching endcaps. Available in black, white, ivory, bronze or clear anodized finish. Color samples available upon request. 3-7/8" or 4-5/8" high as required. (not applicable for Colossal, Access Dual Roller, Access, Ultimate Access, Roman Shade, or FlexShade Panels) Headbox - Complete extruded headbox is available in two styles: surface mount to head, jamb or wall, and pocket mount for ceiling recessed installation. Both in sizes 3-7/8" or 4-5/8" high as required. Type D Pocket - For clean, ceiling flush installation, use extruded Type D Pocket. With bottom closure panel in place, only a narrow slot is visible. Wall Clip with Closure - Pocket already exists? Specify FlexShade Wall Clip with a long or short closure. Wall Clip mounts to the wall and bottom closure panel drops neatly into place without fasteners, leaving a minimal slot through which the shade descends. For sleek appearance, use continuous wall clip. Closure sizes 1-3/4" or 3". Couplers - Draper's FlexShade Coupling System lets one motor or crank operator drive several additional shade rollers. Side "U" Channel or "L" Angle - Prevent direct light gaps at the sides of your shade fabrics by installing side "U" channels or "L" angles. Side "U" channels (avail able in black, white, ivory, charcoal bronze or clear anodized finish) are 1" deep x 2 1/2" wide, mount to the jamb or face of the window opening. "L" angles measure 1" x 3/4" or 1 x 2-3/4" are available in black, white, ivory, charcoal bronze or clear anodized finish and mount inside the jamb. Draper, Inc.
411 South Pearl Street
Spiceland, IN 47385
Tel: (765) 987-7999
Fax: (866) 637-5611
Tollfree: (800) 238-7999
E-mail: drapercontract@draperinc.com
Web site: http://www.draperinc.com
|