Draper FlexShade Hardware and AccessoriesMounting Brackets The standard mounting hardware supplied for wall, ceiling or jamb installation of Draper Motorized and Manual FlexShades. As an option for a pair of 1-5/8" brackets, white bracket covers are available. If optional fascia or headbox are specified, then endcaps (not brackets are supplied).
Fascia Optional extruded fascia in square or radius styles hides hardware and roller. Available in clear anodized (standard), black, white, ivory, or charcoal bronze. 3-7/8" or 4-5/8" high as required. Color samples are available.
Fascia for Dual Roller FlexShade May be mounted inside or outside with matching endcaps. Is a secure fit, notchless and has a small profile. Accommodates manual FlexShades, Motorized FlexShades, Battery operated FlexShades and 24V FlexShades. Five colors: black, white, ivory, bronze or clear anodized, plus custom powder coat is available.
Surface Mounted Headbox Complete extruded headbox is available to hide hardware and roller as an option for Motorized and Manual FlexShades. Two-piece assembly is suitable for surface mount to head, jamb or wall, in sizes 3-7/8" high or 4-5/8" high as required.
Pocket-Style Headbox Complete extruded headbox with endcaps is available for ceiling recessed installation. In sizes 3-7/8" high or 4-5/8" high.
Type D Pocket An extruded aluminum pocket for clean, ceiling flush installation. With bottom closure in place, only a naroow slot is visible. Aluminum pockets offer a convenient architectrual solution for mounting either Motorized or Manual FlexShades at the curtain wall. Installation of Type D Pocket in coordination with ceiling finishing allows for later installation of shades. Pockets are finished in white. FlexShades are installed using standard ceiling brackets. Draper's Type D Pocket cross-section dimensions are 4-1/2" deep x 4-5/8" high. Comes in 12' lengths. A tile-support flange along lower edge supports lay-in ceiling. Pre-welded corners and pocket ends are available. Endcaps optional. Add 1/4" to overall case width if using endcaps.
Wall Clip with Closure Pocket already exists? Specify FlexShade Wall Clip with a long or short closure. Wall Clip mounts to the wall and bottom closure panel drops neatly into place without fasteners, leaving a minimal slot through which shade descends. For sleek appearance, use continual wall clip. Closure sizes 1-3/4" or 3".
Wall Clip with Tile Lip Closures with Wall Clips come in standard lengths and must be cut to fit the space available. Wall Clip with Tile Lip comes in 10' lengths.
Side Channel or "L" Angle Side Channels or "L" Angles prevent direct light gaps at sides of shade fabrics. Side Channels are 1" deep x 2-1/2" wide, and mount to the jamb or face of window opening. "L" Angles measure 1" x 3/4" or 1" x 2-3/4" and mount inside the jamb.
FlexShade Coupler Draper's FlexShade Coupling System lets one motor or crank operator drive multiple window shade rollers. Reduce the number of motors required and you reduce the cost of the project and simplify the electrical portion of the contract. The FlexShade Coupler allows fabrics height to be easily and independently adjusted. Draper, Inc.
411 South Pearl Street
Spiceland, IN 47385
Tel: (765) 987-7999
Fax: (866) 637-5611
Tollfree: (800) 238-7999
E-mail: drapercontract@draperinc.com
Web site: http://www.draperinc.com
|