9500 Maximum Security - AC Slide Gate Operator

The Work Horse Of Maximum Security

DKS 9500 series of Vehicular Slide Gate Operators are designed for use on very large and very heavy gates in maximum security applications only. These operators must never be used in applications serving the general public. These heavy duty operators use a high tensile steel alloy roller chain as the pulling medium, which is immune to slippage and the challenges of uneven terrain - and also simplifies installation. User can set the speed of the gate up to 4 ft/sec. (1.2 m/sec.), with an electronic braking option. All 9500 Series Operator Orders Must Be Coordinated Through A Doorking Regional Sales Manager. The DKS 9500 series operators are designed to operate very heavy vehicular slide gates in limited (Class III) and restricted (Class IV) applications only. These operators must never be used in applications serving the general public. The 9500 series uses a high tensile steel alloy roller chain as the pulling medium, which is immune to slippage and un-even terrain and simplifies installation. These operators include a speed control module which allows the user to set the speed of the gate and have a slow-start and slow-stop function as well. All 9500 Series operator orders MUST be coordinated through a DoorKing Regional Sales Manager.

Features:

• Speed control module.
• Slow start / slow stop.
• Direct driven limit nuts.
• Anti-tailgating feature.
• Adjustable partial open..
• Gate tracker reporting output.
• Built-in diagnostics.
• Ports for plug-in loop detectors.
• Selectable stop / reverse loop functions.
• Two 115 VAC convenience outlets.
• Fail-secure operation includes crank for manual operation.
• Programming switches.
• Built-in 3-button control (open-close-stop)
• Built-in power On/Off switch.

Specifications:

• HP, maximum gate weight*, speed and chain size:
• 9550 - 5 HP, 15,000 lbs., 1 ft/sec, #100 chain (30:1 gear reduction).
• 9555 - 5 HP, 15,000 lbs., 2 ft/sec, #100 chain (10:1 gear reduction).
• 9570 - 7.5 HP, 25,000 lbs., 2 ft/sec, #100 chain (30:1 gear reduction).
• 9575 - 7.5 HP, 25,000 lbs., 2 ft/sec, #100 chain (10:1 gear reduction).
• 9590 - 10 HP, 28,000 lbs., 2 ft/sec, #100 chain (30:1 gear reduction).
• 9595 - 10 HP, 28,000 lbs., 2 ft/sec, #100 chain (10:1 gear reduction).(*Assumes gate is on level ground, in good condition with properly adjusted hardware. Other external factors may affect the performance of the gate operator.)
• 10:1 or 30:1 gear reduction running in a continuous oil bath (dependant on model).
• Electronic and magnetic braking added to models with the 10:1 gfear reduction.
• 208, 230, 460 VAC three-phase.
• Operator is shipped with chain brackets and 20-feet of #100 chain.
• Class III and IV applications only.
• ETL Listed. A minimum of one (1) Type B1 and one (1) Type B2 entrapment protection devices are required to be installed in each direction of travel with this gate operator. Your professional DKS system installer can provide you with more details on these devices and on current industry safety standards.
• Dimensions: 54 "W x 59 "H x 26 "D

Options:

• Plug-in loop detectors.
• Gate Tracker reporting (DKS 1833, 1835, 1837 or 1838 access controllers only).
• Chain tray (recommended on gates exceeding 20-ft in length).
• Non-contact and/or contact sensing devices.
• Stop - Go traffic signal.
• Heater kit for cold environments.
• Surge suppressors.

See More

See Less