DoorKing Inc.
120 Glasgow Avenue
Inglewood, CA 90301
Toll-free: 800-826-7493
Fax: 310-641-1586
E-mail: info@doorking.com
Web site: www.doorking.com

9000 Series Slide Gate Operators
All DoorKing 9000 series slide gate operator systems use the microprocessor based 4402, 4602 or 4702 solid state board that controls all functions of the gate operator system. The 9050, 9070, 9100 and 9150 operators are designed with a single cog-belt drive and clutch system for primary reduction and automatically set both the open and close limit settings. The models 9200 and 9300 use a gear reducer running in a continuous oil bath for primary reduction and use traditional manually adjustable switches to set both the open and close limit settings. All have a built in timer for automatic closing and are designed with an inherent reversing system so that the operator will reverse travel should an obstruction be encountered during the opening or closing cycle. The inherent reversing system is independent of any optional "add-on" devices that may be connected to the system. The 9000 series slide gate operators include advanced features such as our unique Gate Tracker™ reporting system that sends important gate operator data to a companion DoorKing access control system, the ability to open the gate partially to 14 feet, and a special anti-tailgating loop function that helps to curtail vehicles from gaining unauthorized entry by "tailgating" behind a vehicle that the gate was opened for. (Note: Gate Tracker™, partial open and anti-tailgating features do not apply to models 9050 and 9070). The patented fail-safe release system on the 9050, 9070, 9100, 9150 and 9300 models, allows the gate to be manually pushed open during power outages without the need of any special keys or cranks, but will lock the gate should an attempt be made to push it open during normal operation. The model 9200 includes an internal hand crank for manual operation. All models have ports for two DoorKing model 9405 or 9406 plug-in loop detectors. This greatly simplifies detector installation and wiring. The control board has several input terminals for the addition of optional control devices, such as radio controls, card readers, key switches, etc.

Models:
9050: Model 9050 is designed for light-duty residential applications. Maximum gate weight should not exceed 300 lbs and maximum gate length should not exceed 16 feet. The operator will move the gate at a rate of approximately one foot per second. The gate operator is pad mounted and the gate is driven with #41 roller chain. The unit is housed in an attractive cabinet that measures 22 1/2 inches high, 12 inches wide, and 11 1/2 inches deep. This unit uses a 1/3 HP intermittent duty motor, is rated for a maximum of 10 cycles per hour (open/close), and is available in 115-volt single-phase power only.

9070: Model 9070 is designed for light-duty residential and commercial applications. Maximum gate weight should not exceed 500 lbs and maximum gate length should not exceed 22 feet. The operator will move the gate at a rate of approximately one foot per second. The gate operator is pad mounted and the gate is driven with either #41 roller chain. The unit is housed in an attractive cabinet that measures 22 1/2 inches high, 12 inches wide, and 11 1/2 inches deep. This unit uses a 1/2 HP continuous duty motor, is rated for a maximum of 30 cycles per hour (open/close), and is available in 115-volt single-phase power only.

9100: Model 9100 is designed for medium to heavy-duty commercial applications. Maximum gate weight should not exceed 1000 lbs and maximum gate length should not exceed 30 feet. The operator will move the gate at a rate of approximately one foot per second. The gate operator is pad mounted and the gate is driven with either #41 or #40 roller chain. The unit is housed in an attractive cabinet that measures 22 1/2 inches high, 12 inches wide, and 11 1/2 inches deep. This unit uses a 1/2 HP continuous duty motor, is rated for a maximum of 30 cycles per hour (open/close), and is available in 115-volt single-phase power only.

9150: Model 9150 is designed for medium to heavy-duty commercial applications and is available with a 1/2 or 1 HP motor. Maximum gate weight should not exceed 1000 lbs for the 1/2 HP unit or 1500 lbs for the 1 HP unit, and maximum gate length should not exceed 45 feet. The operator will move the gate at a rate of approximately one foot per second. The gate operator is pad mounted and the gate is driven with #40 roller chain. The unit is housed in an attractive cabinet that measures 22 1/2 inches high, 15 inches wide, and 16 1/2 inches deep. The 9150 is rated for a maximum of 30 cycles per hour (open/close), and is available in 115-230-460 volt power. The model 9150 can be equipped with an optional DC drive battery back-up system that will cause the gate to open automatically in the event of a power outage. This system is not designed to maintain uninterrupted gate system operation.

9200: Model 9200 is designed for medium to heavy-duty commercial and industrial applications. Maximum gate weight should not exceed 3000 lbs and maximum gate length should not exceed 100 feet. The operator will move the gate at a rate of approximately one foot per second. The gate operator is pad mounted and the gate is driven with #60 roller chain. The unit is housed in an attractive cabinet that measures 34 1/2 inches high, 16 inches wide, and 16 inches deep. This unit uses a 1 HP continuous duty motor, is rated for a maximum of 30 cycles per hour (open/close), and is available in 115-230-460 volt power.

9300: Model 9300 is designed for medium to heavy-duty commercial applications. Maximum gate weight should not exceed 1000 lbs and maximum gate length should not exceed 30 feet. The operator will move the gate at a rate of approximately one foot per second. The gate operator is pad mounted and the gate is driven with either #41 or #40 roller chain. The unit is housed in an attractive cabinet that measures 27 inches high, 21 inches wide, and 15 1/2 inches deep. This unit uses a 1/2 HP continuous duty motor, is rated for a maximum of 30 cycles per hour (open/close), and is available in 115-volt single-phase power only. The model 9300 can be equipped with an optional DC drive battery back-up system that will cause the gate to open automatically in the event of a power outage. This system is not designed to maintain uninterrupted gate system operation.