minus gif view products
 |   |   | 

Curved Radius Snap-On Seam CRSS10 Non-Structural Standing Seam Metal Roof Panel

Curved Radius Snap-On Seam CRSS10 Non-Structural Standing Seam Metal Roof Panel

PRODUCT: CURVED-RADIUS CR10 is a non-structural curved snap-on-seam system. The system is designed with two components: the panel pan and the seam cover. CURVEDRADIUS is a non-directional panel system allowing installers more control during installation over seam layout and symmetry of the panel area. CURVED-RADIUS panels utilize a 5/8”-7/8" high panel leg with a continuous interlocking groove for radii greater than 35'-0". For radii less than 35'-0", a lower leg height is used in order for the panel to achieve the desired radius. For radii less than 45’-0” and greater than 35’-0” panel leg is button punched en lieu of a continuous bead.

PRODUCT USES AND APPLICATIONS: Product uses include curved roofing, barrel vaults, curved canopies, and curved soffit. This system may be installed on tapered roof areas (see the COMPOUND-CURVE CC10 section of this literature for information) and may be curved with a concave or convex radius.

ROOF ASSEMBLIES: CURVED-RADIUS requires a solid substrate since it is a non-structural panel system. This system may be installed over plywood sheathing or corrugated metal deck.

ADVANTAGES:
  1. Continuous Interlocking Seam: high seam hold-down strength (for radii 35'-0" or less)
  2. Optional Factory Applied Non-Curing Sealant: superior watertightness
  3. Engineered Snap-Together Design: easy installation
  4. Expansion Clips: allows for unlimited thermal expansion and contraction
  5. Anti-Siphoning Seam Design: prevents water infiltration
  6. Custom Panel Widths Available: consult DMI for additional information
STANDARD PRODUCT OFFERING
  • 24 ga. Steel
  • .032 Aluminum
  • 16 oz. and 20 oz. Copper

Custom panel widths are available. Consult DMI for associated costs and lead times.

RADIUS GUIDLINES:
GAGE / MATERIALMINIMUM CONVEX
RADIUS		MINIMUM LAYOVER
RADIUS
24 GA.3'25'
22 GA.8'35'
.032 AL.2'-6"20'
COPPER2'20'

NOTE: Continuous lengths from 4’-0” (min.) up to 70’-0" (max.) is standard. Lengths over 53’ require special hauling permits. Contact DMI for details.

Oil-canning, the slight waviness inherent with light gauge metal, does not affect the finish or structural integrity of the panel and is therefore not cause for rejection.

DIMENSIONAL METALS, INC.
Headquarters
58 Klema Drive North
Reynoldsburg, OH 43068
Tel: (740) 927-3633
Fax: (740) 927-3319
Tollfree: (800) 828-1510

265 Industrial Blvd
Mocksville, NC 27028
Tel: (336) 751-3399
Fax: (336) 751-3330
Toll-Free: (800) 919-1510
E-mail: sales@dmimetals.com
Web site: http://www.dmimetals.com
 |   |   |