Sweets

Rear Projection Screen Frames

• For installation ease, rear projection screens are available in factory frames.
• All frames are of 6063-T5 aluminum alloy with 204-A1R1 black anodized finish.
• Framed screens are shipped as a complete assembly.
• Easily installed in finished openings by carpenters, framed screens eliminate on-site glazing costs.

1. Set screen in opening.
2. Trim out with decor matched moldings.
   Note: Self-Trimming Frame requires no trim-out.
3. Shim when necessary.

The customer must specify overall size of the frame outside dimension (not size of opening) and must be careful to allow for the space required to fit the factory framed screen into the opening. Note: The Self-Trimming Frame’s finish molding is part of the frame. Be sure to use the measurement from the edge of the frame not the edge of the finish molding when calculating the frame insert size.

SELECT THE FRAME

DELUXE FRAME

• Impressive architectural design adds sophistication to every installation.
• Heavy-duty box frame construction of 2 3/4" X 3" (69.85 mm x 76 mm) rectangular dovetailed tube of .125" (3.18 mm) wall thickness is secured at the corners with self-tapping screws and mounting clips of .125" aluminum channel.
• Dovetailed design eliminates light leaks without caulking.
• Ideal for larger, heavier glass or acrylic screens in 1/2" thickness up to 10' x 20' glass and 9' x 18' acrylic.
• Available in an anodized black finish.
• Frame dimension equals viewing area plus 5 1/2".

SELF-TRIMMING FRAME

• Self Trimming feature eliminates the need for finish trim and makes for a fast and easy installation.
• Built-in 1 ½” wide finished molding to hide opening.
• Recommended for use with 1/4", 3/8” and ½” Da-Plex™ and Da-Glas™ in sizes up to 20’ wide. Consult factory for larger sizes.
• Available in an anodized black finish.
• Adds 5-7/8" to overall viewing area.
• Frame insert size equals viewing area plus 2-7/8".

SELECT THE FRAME

STANDARD FRAME

• Same rugged construction and design as Deluxe Frame, but 2" x 1-3/4" (50.8 mm x 45 mm).
• For screen panels up to 6' x 10' x 3/8".
• Standard factory framed screens are captured by two glass stops, centered and mounted to the base frame.
• Screens are positioned in frames with setting blocks on each screen edge and are centered between the faces of the glass stops with flexible extruded gaskets.
• Available in an anodized black finish.
• Frame dimensions equal viewing area plus 4".

BASE FRAME

• Recommended for use with 1/4" Da-Plex™, Da-View and DNP in sizes up to 6’ x 8’ and 1/4'” Da-Glas™ in sizes up to 4’ x 5’.
• Lightweight extruded aluminum U-channel. 23.81 mm wall thickness and weighs approximately 5 oz. per linear foot (0.142 kg/m). Secured at the corners with self-tapping screws and mounting clips.
• Mitered corners eliminate rear light leaks without caulking.
• Available in an anodized black finish.
• Frame dimensions equal viewing area plus 2-1/2".

Da-Lite Screen Company
3100 North Detroit Street
P.O. Box 137
Warsaw, IN 46581
Tel: (574) 267-8101
Fax: (574) 267-7804
Tollfree: (800) 622-3737
E-mail: info@da-lite.com
Web site: http://www.da-lite.com