Sweets

CurvGrid Two Directional System

Applications
Dramatic waved ceilings, islands, vaults and
transitions between ceiling heights in
small-and large-scale interior spaces.

• Two-directional grid suspension system curved in the vertical plane.
• Engineered to project specifications.
• Smooth grid surface without crimped tees.
• Use with or without flexible infill panels.
• Primary Carrier (patent pending) support for tees and trim.

• Vertically curved perimeter trim for CurvGrid ceilings.
• Sturdy extruded aluminum for high quality perimeter treatment.
• Tight butt joint splices and miters.
• Single section trim eliminates additional tees around perimeters.

• Reduce installation cost by up to 50%.
• Quality architectural fit and finish.
• No punch lists.
• Sustainable: 75%-100% recycled content; 100% locally recyclable.

Material
RID- painted galvanized steel body and cap
PANEL- flexible infill - lay-in with hold-down clips

Surface
painted aluminum and galvanized steel, clear lacquer aluminum, anodized aluminum

Size
2'x2' standard and non-standard modules

Fire
Class A: flame 0, smoke 0 per ASTM E 84 (metal)

Sound
NRC - perforated with Acoutex backer: 0.70
NRC - perforated with 1-1/2" fiberglass acoustical pad: 0.90

Performance
Intermediate duty, standard environment

Suspension
GRID - 15/16" width x 1-1/2" high
GRID - straight and curved to 30" minimum radius

Primary Carrier
1-1/2" diameter

Classification
Type XX, pattern C, G per ASTM E 1264

Warranty
1 year limited

Sustainability
Steel: 25% minimum, aluminum: 100% recycled content;
100% locally recyclable global manufacture

Chicago Metallic Corporation
4849 S. Austin Ave
Chicago, IL 60638
Tollfree: (800) 323-7164
Fax: (800) 222-3744
E-mail: cmc-customerservice@chicagometallic.com
Web site: http://www.chicagometallic.com