Chase SD 2000 Series Service Doors weigh significantly less than impact doors,
making them easier to open and more popular in light duty applications where
low costs and aesthetic appeal are considerations. Café style door with
gate hinge also available.
Door Panel – The doors are constructed with .063” anodized
aluminum. A decorative, high-pressure laminate finish is available on one
or both sides. Approximate weight for each panel is 1-3/4 PSF.
Back Edge Spine – 1” thick by 5” wide back edge spine is
reinforced with 3/8” plywood and capped with aluminum for added strength
and durability.
Leading Edge – Leading edge is formed in a diamond
for vertical panel stiffness and edge protection, reducing potential damage.
Hinge – Proven hinge system mounts to the jamb with offset cam system
and hardened rollers, for years of service with minimal maintenance.
Window & Frames – Windows are 9” x 14” acrylic set in
black rubber molding.
Options – Windows, hinge guard and impact plate.
For more information, visit our web site at: www.chasedoors.com
Doors shown as Aluminum Sheet Style Doors shall be Chase Model:
___ SD 2000
___ SD 2002
as manufactured by Chase Doors in Cincinnati, Ohio, to fit door opening size
_____ wide by _____ high.
Door to be: ___ Biparting ___ Single Panel ___ Cafe/Gate
Door panels shall be constructed of .063" thick aluminum as indicated:
___ Satin Anodized Aluminum Finish on Model SD 2000
___ Clad with High Pressure Plastic Laminate on Model SD 2002
Doors to have 1" thick x 5" wide back edge reinforcement spine. Back
edge spine shall have plywood core and be clad with proper aluminum to match
door body. Leading edges of door panels to have structural formation.
Acrylic vision panels are 1/8" x 9" x 14" centered 60" from floor in each door panel and set in black rubber molding.
Optional window sizes:
Consult Factory
Doors to be mounted on self closing, exclusive Chase Gravity Operated Hinging
System with hardened steel cam and rollers.
___ Standard Type "C" Hinge to be used at top. Bottom hinge pin assembly
is a steel rod welded to a 3/16" thick steel angle.
___ Optional Type "E" Hinge to be used at top. Bottom hinge pin assembly
is a steel rod welded to a 3/16" thick steel angle.
Optional hinge protection:
___ Lower Hinge Guards
To download specifications and drawings visit our web site at: www.chasedoors.com
Chase Doors
Cincinnati, OH · Redmond, OR
Toll Free: 800.543.4455
Fax: 800.245.7045
E-Mail: info@chasedoors.com
www.chasedoors.com
|