Designed for high cycle, abusive applications, the ColdGuard horizontal sliding
door is the workhorse of our cold storage product offering. We offer single
and bi-parting doors for coolers and freezers in a variety of finishes. Durability
is the key to long life in a horizontal sliding door. Design features including
heavy duty FRP framework, heavy duty track system with permanently lubricated
rollers and molded polymer casings make the ColdGuard the "best in class".
All horizontal door systems are available manual or motor operated. Standard
4" thick and optional 6" (for applications below -20F. are available.
Most major door manufacturers utilize a balloon type seal that is either attached
to the jamb casing or the door panel. This type of seal is subject to wear
and tear during normal operation and is easily damaged. The PerfectSeal System
utilizes a two-ply, fabric reinforced blade seal gasket against the top and
side edges of the door panel instead of the front face. This solves a number
of issues including frequent replacement of worn out seals, wear and tear on
sealing surfaces and gasket damage from impact. With reduced drag from the
gaskets and no need to pull the panel away when opening or pushing it into
the wall when closing the ColdGuard Door is much easier to use than competitor's
doors.
Sliding Cold Storage Door systems have to stand up to extreme conditions and
heavy duty usage everyday. Our SD (Standard Duty) and EHD (Extra Heavy Duty)
track systems have been designed to perform reliably for years with virtually
no required maintenance. Our SD model is designed for smaller to midsize doors
(6' wide or less) while the EHD model is ideal for any size door in the most
abusive environment. An optional hood system is available with the EHD.
Specially designed gusseted steel corner brackets are machined to perfectly
fit inside the profile of the FRP pultrusions, providing exceptional frame
strength and eliminating the need for aluminum, wood and PVC bracing.
Unique design allows Non-CFC foamed-in-place polyurethane insulation to lock
components in place with the fiberglass reinforced polymer (FRP) producing
and extremely durable, insulated panel.
Maintenance free heavy duty extruded aluminum track rail with two 700 pound
capacity 1-1/4" wide x 4" diameter double ball bearing polyurethane
rollers.
Freezer doors have perimeter heat to prevent moisture or ice buildup.
Heavy duty 2-1/2" diameter non marking stay roller guides the sliding
panel as it opens and closes.
Door panels are available in 4" and 6" panel thickness with an R-Value
of 28 and 37.1 respectively.
All doors are custom manufactured to your exact requirements. Standard door
sizes range from 36" wide x 144" high, but larger and smaller doors
are not a problem.
Electric models feature a manual emergency release on both sides of the door
to allow access during power failure.
Factory tested and shipped ready for installation.
Options – Backup mirror image casing, jamb wall caps, polished aluminum
diamond tread kick plates, 18 gauge satin finish stainless steel kick plates,
heated or non-heated vision windows, 6” door thickness for extreme cold
environments, heavy duty operator, a variety of activators, time delay close,
electric interlock, 3 button partial opening control, thru wall jambs, padlock
locking device, wicket door, metal clad vertical casings and header, track
hood or motor hood for outdoor and washdown applications.
Optional Cladding - 24 gauge type 304-3B stainless steel, embossed white aluminum,
embossed mill aluminum, smooth with aluminum, smooth white galvanized, smooth
galvalume.
To download specifications and drawings visit our web site
at: www.coldstoragedoorsonline.com
Chase Doors
Cincinnati, OH · Redmond, OR
Toll Free: 800.543.4455
Fax: 800.245.7045
E-Mail: info@chasedoors.com
www.chasedoors.com
|