Ribbed Wall Panels & Ribbed Roof Panels
MVW (Versatile Panel) has 1-1/8 inch deep major ribs which taper
in width from 1-3/4 inches to 3-1/2 inches and are spaced 12 inches on
center. Between each major rib are two minor stiffening ribs. The "leading
edge" rib has a bearing leg. Each panel provides 3 feet of lateral
coverage. Panel finish may be specified as GALVALUME® or any one of
Ceco’s standard panel colors.
MSP (Shadow-Lite Panel) has 1-1/4 inch deep ribs which reverse
taper in width from 2-3/4 inches to 3/4 inches and are spaced 12 inches on
center. Between each major rib, the panel is formed into a sculptured "valley"
shape with six small "pencil" ribs in each "valley."
Each panel provides 3 feet of lateral coverage. Panel finish may be
specified as GALVALUME® or selected Ceco paint colors.
MAP (Architectural Panel) has 1-1/2 inch deep major ribs which
taper in width from 2 inches to 3-15/16 inches and are spaced 12 inches on
center. Between each major rib are two minor stiffening ribs and two small
"pencil" ribs. The "leading edge" rib has a bearing
leg. Each panel provides 3 feet of lateral coverage. Panel finish may be
specified as GALVALUME® or selected Ceco paint colors.
CWP16 (Concealed Fastener Wall Panel) is roll-formed with the
face of the panel having an inset portion in the center third of the
16-inch width. Panel is 3 inches deep at the high planes and 1-1/2 inches
deep at the low plane.
Side laps are of interlocking flange design to form a rigid, permanently
tight joint that won’t open up or pull apart. Panels are connected to
supporting structural members with fasteners that are concealed from
exterior view.
Entire face of panel is embossed to add texture, and finish is an
extended life color coating (KYNAR/TRINAR) from selected Ceco Premium
Paint colors.
MIP (Interior Panel) has 3/4 inch deep ribs which taper in width
from 1-1/8 inches to 2 inches and are spaced 6 inches on center. The "leading
edge" rib has a bearing leg. Each panel provides 3 feet of lateral
coverage. Panel finish may be specified as GALVALUME® or selected Ceco
paint colors.
Ribbed Roof Panels
MAP (Architectural Panel) has 1-1/2 inch deep major ribs which
taper in width from 2 inches to 3-15/16 inches and are spaced 12 inches
on center. Between each major rib are two minor stiffening ribs and two
small "pencil" ribs. The "leading edge" rib has a bearing leg. Each panel
provides 3 feet of lateral coverage. Panel finish may be specified as GALVALUME®
or selected Ceco paint colors.
Note: MAP has achieved UL 90 listing.
Warranties
� Material: 3 years
� GALVALUME® panels: 20 years, 6 months
� Ceram-A-Star 950: 10 years roof and walls
� KYNAR/TRINAR: 20 years
� Weathertightness: (optional) 20 years standing seam only
Finishes
GALVALUME®: Zinc-aluminum coating over steel substrate
Ceram-A-Star 950: Silicone polyester finish over GALVALUME® substrate
KYNAR/TRINAR: 1 mil Kynar long life finish over GALVALUME® substrate
GALVALUME® is a registered trademark of BIEC International, Inc.
Ceram-A Star® is a registered trademark of Elf Atochem Na, INC.
KYNAR/TRINAR is a registered trademark of the AKZO Noble Coatings,
Inc.
Ceco Building Systems
Toll-Free: (800) 678-9589
Fax: (662) 243-6577
E-mail: marketing@cecobuildings.net
Eastern Region: Tim Schrock: (252) 407-1800
Midwest Region: Lynn Chesnut: (319) 217-4008
Southern Region: Mike Round: (662) 243-6458
|