The CENTRIA Versapanel Factory Foamed Panel System provides a strong, energy-efficient wall system clearly defined by bold ribs that add an attractive linear definition to large structures. Economically priced, the Versapanel System is available in thicknesses to meet a range of thermal conditions with "R" values as high as 32 [U=0.18].
Pre-assembled, each Versapanel module is a single wall or roof unit incorporating the interior surface, vapor barrier, thermal insulation and long-life exterior metal substrate. It is the ideal choice for high humidity conditions, highly insulated structures, and building requiring long spans.
- Insulated with urethane modified isocyanurate foam core in variable depths
- Factory-assembled panels can be installed in any type of weather making installation faster and easier than most other types of wall and roof systems
- Strong steel skins increase span capability for savings in support steel; They establish a vapor barrier when combined with factory- and field-applied butyl sealant
- Lightweight panels permit lighter building structures plus reduced framing support and panel installation costs
- Lightly planked interior liner works compositely with the face sheet to allow longer spans
- Concealed fasteners provide a clean, uninterrupted appearance
- Outstanding weather resistance results from double tongue-and-groove joinery and factory-applied air and vapor sealing
- A thermal break is achieved because there is no metal-to-metal contact between the face and liner M
- Factory-formed metal flashing is available
- Overlapping joint structure for multi-course applications
- Batten cap is standard on roofs and optional for walls
- Standard - 26/26 (Optional gages available) [0.48mm / 0.48mm]
- G90 (Z275) galvanized steel
- Exterior - Non-directional embossing, lightly planked
- Interior - Non-directional embossing, lightly planked
- Double tongue-and-groove joinery with factory-applied air and vapor seal
- 40'-0" [12.19m] (Contact CENTRIA for longer lengths)
- 1-3/4" [44mm]
- 2-1/2" [64mm]
- 4" [102mm]
- 1-3/4"depth – R14 [44mm – U=0.41 W/m2K]
- 2-1/2"depth – R19 [64mm – U=0.30 W/m2K]
- 4"depth – R27 [102mm – U=0.21 W/m2K]
All CENTRIA products undergo stringent testing to ensure their performance. Versapanel panels are tested in compliance with UL, FM, and ASTM procedures as well as various regional and local building code requirements.
In-house architectural and structural design professionals can assist from project conception through completion. Assistance with design specifications, coating selection and engineering enables customers to take full advantage of the design flexibility of CENTRIA products. Installation services are through CENTRIA's nationwide distribution network.
CENTRIA Architectural Systems
1005 Beaver Grade Road
Moon Township, PA 15108-2944
Tel: 412-299-8000
Toll-Free: 800-759-7474
Fax: 412-299-8317
Website: www.CENTRIA.com
|