MicroLine details incorporate aluminum extrusions designed to integrate visually
and mechanically with CENTRIA profile panels. Slim 1-1/2” to 2-1/2”
wide MicroLine extrusions make it a snap to trim and finish around windows and
doors, inside or outside corners, and at the base of walls; or to create clean
vertical joints. MicroLine details enable you to replace wide obtrusive flashing
and exposed fasteners with narrower, crisper and cleaner finished lines, and can
be finished to match or complement wall panels. Currently available for horizontal
IW-60A, Style-Rib, BR5-36, and TR4-36. MicroLine details are available for Concept
Series profile in horizontal and vertical applications.
MicroSeam Corners use cutting edge structural boning techniques to produce corners
that appear virtually seamless. Manufactured from the same G-90 galvanized steel
coil as the panels, MicorSeam Corners employ no welding and no pop rivets. Available
in CENTRIA’s full palette of nearly 100 colors, including metallics. Like
all CENTRIA panels, they are fully tested for performance. MicroSeam Corners are
available on BR5-36, Econolap-3/4”, MR3-36, Style-Rib, Super-Rib, TR4-36,
IW-60A, and all Concept Series profiles.
CENTRIA Profile Louvers come in gages, colors and finishes to match corresponding
panels and blend invisibly into a wall, eliminating visual breaks in sight lines.
Profile Louvers are available for horizontal coordination with BR5-36, MR2-26,
Style-Rib or Super-Rib wall panels.
With the CENTRIA Curved Architectural Panel (CAP) System you can add curved design
elements to your projects. Available in a wide selection of profiles, finishes
and colors to match virtually any architectural, commercial or industrial application,
CAP is ideal for canopies and awnings, roofing, fascia, walls, curved parapets,
curved trim, column and beam wraps, miters and bullnoses – even custom shapes
– where it can be used to add bold visual statements or innovative special
effects.
CENTRIA fabricates CAP System panels from a variety of G-90 galvanized steel
substrate architectural panel profiles. CAP System panels are available in a number
of finishes to match your application, and in the full CENTRIA color palette.
The energy needed to heat or cool a building depends on the heat loss or gain
through the walls and roof. CENTRIA Liner Panels work in concert with CENTRIA
insulated wall and roof systems to conserve valuable energy while providing an
attractive interior surface.
- Liner panels incorporate a flush liner panel, subgirts, varying thicknesses
of noncombustible fiberglass insulation, and any CENTRIA profiled panel for the
exterior
- R values as high as 20 (U=0.05) can be achieved by varying the insulation
thickness and subgirt depths.
- Consult CENTRIA for your specific requirements.
- Subgirts in Zee and Hat shapes, roll formed from 16 and 18 gage galvanized
steel
- Liner panels provide a flush appearance to the building interior
- Perforated liner panels for improved acoustical performance
- Standard acrylic coating, Arctic Ice color; Optional coatings and colors available
- 24-18 gage, G90 galvanized steel
- 24" [610mm] panel width
- 30'-0" panel length
- L2 = 1-3/8" [35mm]
- L2-2 = 2" [51mm]
- L2-3 = 3" [76mm]
- L21A* = 1-1/2" [38mm]
*L21A is a concealed fastener liner panel for use with split-wall construction
or when fastening from the inside is required.
CENTRIA Architectural Systems
1005 Beaver Grade Road
Moon Township, PA 15108-2944
Tel: 412-299-8000
Toll-Free: 800-759-7474
Fax: 412-299-8317
Website: www.CENTRIA.com
|