Bradley Corporation
P.O. Box 309
W142 N9101 Fountain Blvd
Menomonee Falls, WI 53052-0309
Toll-Free: (800) BRADLEY
Fax: (262) 251-5817
Web site: http://www.bradleycorp.com

Circular models accommodate up to 8 users at a time. All models utilize less water, energy, and space than lavatories equipped with conventional faucets. The washfountain bowls, pedestals, and valve sets are completely assembled. Only the support column and connections to the valve set and drain require assembly. The operating range is 20 – 80 PSI. Approximate flow-rate is 5GPM.

• UPC Approved
• Pre-Assembled Bowl and Pedestal
• Available in 54" or 36" Diameter Bowl Size
• Designed for Heavy Duty Hand Washing
• Foot Control or Infrared Sensor Operation
• Available in Terreon^® or Bradstone^®
• New Bradstone^® Colors now Available

Semi-circular models accommodate up to 3 users (36" models) or 4 users (54" models) at a time. Circular models accommodate up to 5 users (36" models) or 8 users (54" models) at a time. All models utilize less water, energy and space than lavatories equipped with conventional faucets. The washfountain bowls, pedestals and valve sets are completely assembled. Only the support column and connections to the valve set and drain require assembly. The operating range is 20 – 80 PSI. Approximate flow-rates for each model:

• 36" semi-circular: 1.25 gpm
• 54" semi-circular: 3 gpm
• 36" circular: 2 gpm
• 54" circular: 5 gpm

Constructed of Terreon^®, a densified solid surface material composed of polyester resin. Terreon^® is resistant to chemicals, stains, burns and impact. Surface damage can be easily repaired with everyday cleansers or fine grit abrasives.

Bradstone^®: An extremely durable plastic material made of reinforced thermosetting polyester resins, finely ground inorganic fillers and fade resistant pigments.

Pedestals: Constructed of die-formed legs, upper braces, scuff bases and panels: legs are zinc chromate plated 14 gauge steel; upper braces are 16 gauge galvanized steel; and scuff bases are 300 series stainless steel with a #4 finish. Terreon^® models have pedestal panels with the same 300 series stainless steel and Bradstone^® models have tapered, vacuum-formed plastic panels.

In addition to the bowl and pedestal assembly, the following valves and fittings are standard: sprayhead with stainless steel support tube and bowl gasket; spud with domed strainer; sprayhead supply line; manual mixing valve; volume control valve; and (2) stop, strainer and check valves.

Each press of the foot rail mechanically actuates a hold-open valve, with slow closing upon release of foot pressure.

Each push button pneumatically actuates a non-hold-open, air metering, single temperature valve with field adjustable timing from 0 – 45 seconds. Factory preset at 10 seconds. Each push button activates a flow of tempered water from the non-sectional sprayhead. Push button requires less than five pounds of pressure.

Each of the stream formers is controlled by a separate solenoid valve. Hands placed within the bowl are detected by an infrared sensor module which activates a flow of tempered water from one station. Shut-off is automatic after hands are removed from the detection area.

The infrared sensor uses a conical-shaped transmitting beam, having a detection area adapted to, but not exceeding, the bowl perimeter. The detection area projects forward 15° to each side and 15° below. The adaptive infrared sensor automatically adapts to the bowl after power is turned on.

The infrared sensor is not affected by varying color tones or darkness. Direct sunlight or bright washroom lights will not activate the system. Infrared models also include solenoid valves and a low-voltage transformer as standard equipment:

• Solenoid – 24V, 50/60 Hz, 3/8" NPT. Few moving parts, and resistant to most chemicals, minerals, and impurities often present in municipal water supplies
• Low-Voltage Transformer – Class II UL/CSA listed, 110/24 VAC plug-in transformer. Plugs into a standard GFCI protected electrical outlet. Location of transformer per local electrical code

Each low-voltage button actuates a non-hold-open, slow-closing anti-hammer solenoid valve that is timed from an electronic potted assembly. Each push button activates a flow of tempered water from the non-sectional sprayhead. Touch Time^® controls water flow at each station through the use of solid state, digital circuitry. Timing is electronically controlled at 15 seconds. Push button requires less than five pounds of pressure.

The pre-assembled Classic Washfountains are Uniform Plumbing Code (UPC) approved through the International Association of Plumbing and Mechanical Officials (IAPMO).

Terreon^® is NAHB certified to meet ANSI Z124.3, Z124.6 and ANSI/ICPA SS-1-2001.