Safety Rail 2000

Meet the World's Most Versatile and Non-Penetrating Guardrail System! Companies are using SafetyRail 2000 for: Fall Protection, Temporary Fall Protection, Roof Edge Protection, Roof Hatches, Skylights, Hazard Barriers, Warehouse Dock Doors, Warehouse Traffic Lanes, Cell Workstations, Construction Dig Sites, Dock Platforms, New Building Construction, Drive-In Truck Pits, Rail Car Platforms, Mezzanines, Break Areas, Assembly Areas, Conveyors and many more. This is why more companies are using SafetyRail 2000.

Why Are More Companies Choosing SafetyRail 2000?

• No holes need to be drilled
• It's 100% portable
• Meets and Exceeds OSHA Regulations for Fall Protection
• Install over 600 feet in an hour with three men
• Rails can be positioned in infinite directions
• Each base can support up to 4 rails
• Gate assemblies available
• Optional toe board brackets
• All rail sections have a powder coat finish
• Special orders for non-standard colors and galvanizing
• Custom engineering / manufacturing for special requirements
• Protect your employees and visitors with out hassle

SafetyRail 2000 has been tested by a nationally known engineering firm and found to be in accordance with OSHA regulations. These regulations are in fall protection for guardrail; sections 1910.23 and sections 1926.500 - 1926.503.

It is 100% portable and yet exceeds OSHA Standards for permanent railings. It sets up in minutes (over 340 feet in an hour!) and you do not have to drill into your expensive flooring or decking as you would with other railing systems. Want to rearrange your plant or warehouse? Not a problem with the SafetyRail 2000 system. Just unlock and remove the rails (available in 5', 7.5' and 10' sections) from the bases and move them to your new location, reinsert the rails, lock them into place and your job is finished. No need to call a concrete drilling company to drill the new stanchion plate holes or to plug the old holes. The bases have rubber pads to protect your floor from damage, plus cast-in handles for ease of handling when positioning into place. Another designed in feature of the base is a positive locking system that enables you to lock the rails into infinite positions. No other system can match this feature! And finally, to add to the versatility of this product, we have designed a gate system that comes in various sized lengths.

The Stealth Rail is a collapsible portable guard rail and safety rail system. The most versatile guard rails in the industry and they exceed OSHA regulations. The Stealth Rail is a collapsible guard rail section for the SafetyRail 2000 Guardrail System. Its one-way pivot assembly allows the guardrail to fold on to a surface and then not exceeding a vertical plane when in the upright position. A detent pin on each pivot assembly locks the safety guard rail in the upright position. Stealth Rail guardrails require no penetrations in substrates for installation. The system exceeds OSHA (Standards - 29 CFR) 1926.501 and 1926.502.

When the system is in its folded position, there are clean sightlines from ground level and the building's architectural integrity is preserved. If you are concerned with aesthetics, the StealthRail is your solution!!

• Save $$$$ over an engineered lifeline system.
• Rails come in 3', 3-1/2', 4', 5', 7-1/2' and 10'.
• A tough UV yellow powder coat finish comes standard. Other colors and galvanized finishes are available.
• The rails can be mounted in infinite positions.
• Use the system around mechanicals or for perimeter protection.
• Certified test results are available.