Berridge VANTAGE POINT re-roofing system combines a new aesthetic look with simple mechanical attachment over existing flat, built-up roofs that will last for years to come. VANTAGE POINT is more than just a patch up or a re-roof solution; it is a permanent new roof with a new higher profile which gives your old building a totally new look. The sloped, light-weight, self-supporting metal panels need no substrate, thus avoiding extra weight and cost. They provide a watertight standing seam that sheds water in contrast to dated, flat, built-up roofs which are subject to water ponding and subsequent leakage. Added insulation may be placed on the existing flat roof.
Economical Installation – No Tear-Off Required!
High-Quality Structural/Architectural Panel – The Berridge Zee-Lock architectural/structural standing seam roof systems provides superior aesthetic appearance and excellent performance.
Single-Source Convenience – The installer orders all necessary coil material & components and all pre-cut retrofit roof system framing members from Berridge.
Roof Design: Low slope to steep mansard profile. Intersecting planes such as hips, dormer and valleys should be kept to a minimum.
Penetrations: Minimize penetrations such as skylights, curbs for roof-mounted heating or air-conditioning units, etc.
Insulation – The space between the old and new roof allows for low-cost, blanket insulation to greatly reduce heating and cooling costs.
Vapor Barrier (if required) – A vinyl vapor barrier on the underside of the blanket insulation avoids condensation from the building penetrating insulation and reaching the framing system and roof panels.
Mechanical Equipment – Any existing and new mechanical equipment should be located at ground level to reduce penetrations.
Ventilation – The new attic space can be vented with ridge vents or louvers.
Thermal Movement – Accommodated at the eaves and with inner-rib expansion joints.
Visit www.berridge.com for more information including: complete installation details (PDF), CADD details (DWG), color selection information, specifications, architect and designer resources and much more.
Berridge Corporate & Sales Headquarters
6515 Fratt Rd.
San Antonio, TX 78218
1-210-650-3050
1-800-669-0009
Fax: 210-650-3050
E-mail: sales@berridge.com
Berridge Design & Technical Assistance
1720 Maury St.
Houston, TX 77026
1-713-223-4971
1-800-231-8127
Fax: 713-236-9422
Design: igordon@berridge.com
Technical: bmarks@berridge.com
Berridge Marketing Department & Sample Requests
1720 Maury St.
Houston, TX 77026
1-713-223-4971
1-800-231-8127
Fax: 713-236-9422
Samples: marketingservices@berridge.com
Marketing: marketing@berridge.com
|