Vantage Point Retrofit Roof SystemBerridge VANTAGE POINT re-roofing system combines a new aesthetic look with simple mechanical attachment over existing flat, built-up roofs that will last for years to come. VANTAGE POINT is more than just a patch up or a re-roof solution; it is a permanent new roof with a new higher profile which gives your old building a totally new look. The sloped, light-weight, self-supporting metal panels need no substrate, thus avoiding extra weight and cost. They provide a watertight standing seam that sheds water in contrast to dated, flat, built-up roofs which are subject to water ponding and subsequent leakage. Added insulation may be placed on the existing flat roof. Economical Installation – No Tear-Off Required! High-Quality Structural/Architectural Panel – The Berridge Zee-Lock architectural/structural standing seam roof systems provides superior aesthetic appearance and excellent performance. Single-Source Convenience – The installer orders all necessary coil material & components and all pre-cut retrofit roof system framing members from Berridge. A Retrofit Design Checklist for Architects & DesignersRoof Design: Low slope to steep mansard profile. Intersecting planes such as hips, dormer and valleys should be kept to a minimum. Penetrations: Minimize penetrations such as skylights, curbs for roof-mounted heating or air-conditioning units, etc. Thermal & Mechanical ConsiderationsInsulation – The space between the old and new roof allows for low-cost, blanket insulation to greatly reduce heating and cooling costs. Vapor Barrier (if required) – A vinyl vapor barrier on the underside of the blanket insulation avoids condensation from the building penetrating insulation and reaching the framing system and roof panels. Mechanical Equipment – Any existing and new mechanical equipment should be located at ground level to reduce penetrations. Ventilation – The new attic space can be vented with ridge vents or louvers. Thermal Movement – Accommodated at the eaves and with inner-rib expansion joints. Visit www.berridge.com for more information including: complete installation details (PDF), CADD details (DWG), color selection information, specifications, architect and designer resources and much more. Berridge Corporate & Sales Headquarters
6515 Fratt Rd.
San Antonio, TX 78218
1-210-650-3050
1-800-669-0009
Fax: 210-650-3050
E-mail: sales@berridge.com
Berridge Design & Technical Assistance
1720 Maury St.
Houston, TX 77026
1-713-223-4971
1-800-231-8127
Fax: 713-236-9422
Design: dbang@berridge.com
Technical: bmarks@berridge.com Berridge Marketing Department & Sample Requests
1720 Maury St.
Houston, TX 77026
1-713-223-4971
1-800-231-8127
Fax: 713-236-9422
Samples: marketingservices@berridge.com
Marketing: marketing@berridge.com
|