Ascension Virtuoso Vertical Portable Wheelchair Lift

The Ascension Virtuoso 5460P Model Series provides access to stages and platforms in multiple locations with just one unit. No installation is required. Use the lift when and where you need it, then simply store it away.

The lift is completely self-contained and compact, requiring no additional components. Every Ascension portable lift ships as a fully assembled product. There is no permanent installation; the lift plugs into a standard 120-volt wall outlet and is ready for use. No building alterations or site preparations are required.

The Ascension portable model is easily moved by one person and rolls on its own casters. The casters are quickly removed during the setup process in order to provide a stable platform for operation. The lift then plugs into a standard 120-volt wall outlet and is ready for use. The entire process takes only minutes to complete. No building alterations or site preparations are required.

The Ascension portable lift is rugged and durable enough for a variety of applications, whether for multiple uses within a particular building (convention center) or for relocation throughout an entire geographical area (school district). The lift is easy to transport over long distances by forklift, truck, or trailer. The lift is also weather-hardened for temporary outdoor use.

The Ascension Virtuoso vertical portable wheelchair lift can be relocated through doorways as narrow as 36" using the compression feature. This innovative capability allows the Ascension lift to be used in virtually any building with single doorways, such as older schools.

• Portable – the lift can be moved by one person and rolls easily on its own casters
• Low profile design (no machine tower) – maintain viewing lines
• No access ramp – patrons can enter the lift directly at floor level
• Maximum vertical travel of 60"
• 54" long platform – accommodates individuals in scooters and over-sized wheelchairs
• Modern, attractive appearance – the lift blends into any interior architecture and décor
• No permanent installation required – the lift is fully assembled prior to shipment
• No building alterations or site preparations required – maintain original architectural integrity of a building
• Fast set up – one person can set up the lift in minutes
• ADA compliant – meets all requirements and provides for independent use by individuals with disabilities
• Narrow doorway pass-through capability – for relocation of the lift through 36" doorways
• Stage adjustment device – used to quickly set the stage height
• Electrical requirements – plugs into any standard 120-volt outlet and draws only 9 amps when ascending, 1 amp when descending
• Multiple control stations – three sets of control stations (one inside the platform for passenger operation; the other stations are at the front and back ends for attendant operation)
• Dock plate automatically lowers into position to span the gap between the lift platform and the stage
• Transparent side walls and gates – all four sides are made of high-impact thermoplastic, framed with structural steel
• Electro-hydraulic lifting mechanism – easily lifts 750 pounds; quiet operation will not interrupt a performance

• All four sides of the platform are 43" high, making the lift safe for persons using crutches or walkers
• Durable safety skirting completely encloses the operating components and the underside of the platform
• Ground Fault Circuit Interrupter (GFCI) shuts off power in case of partial or complete short circuit or current overload
• Gate interlock to prevent accidental opening of lower landing gate
• Structural safety factors as specified in ASME A18.1
• Lift will not move if either gate is open
• Hydraulic hand pump can raise and lower the lift without power
• Slip resistant surfaces on the platform floor and dock plate
• Lift will not operate when in transport mode
• Self-closing gates for added protection
• CE marking

• Lift cover
• Stanchion package for lift recall at floor and stage level
• Larger casters for uneven or rough surfaces and improved outdoor portability
• Extended warranty plans
• Vandal-resistant controls
• Stage guard for 38" to 60" stages
• Stairbridge for access over stairs
• Backup power supply
• Alarm for passenger assistance request
• Alternate colors

Ascension sells direct as the manufacturer. Contact Ascension for a factory-direct price quotation.

The Ascension Virtuoso is covered by a standard 20-year drive train warranty.

Specifications, drawings, BIM/3D models, and other detailed product information are available from Ascension.

Complete customer service and engineering support is available directly from Ascension.