Sweets

Ampco Products, Inc.
11400 NW 36 Avenue
Miami, FL 33167
Tel: (305) 821-5700
Fax: (305) 688-5160
E-mail: info@ampco.com
Web site: http://www.ampco.com

SHC
Standard Hollow Core
AWI: SHC - HPDL

Quality Standards:
Conforms to NWWDA Industry Standard I.S.-1and Architectural Woodwork Institute section 1300-G-6 for type SHC.

Maximum Size:
Single Door: (unrated) 4/0 x 8/0

Pairs: 4/0 x 8/0 or 8/0 x 8/0

Thickness:
1 3/8” (± 1/16”) or 1 3/4” (±1/16”)

Frame Components:
Stiles: (before trim or pre-fit) 1 3/8” structural composite lumber (SCL) or mill option kiln-dried hardwood. Not bonded to core. (With laminate edge or exposed).
Rails: (before trim or pre-fit) 1 3/8” structural composite lumber (SCL) or mill option kiln-dried hardwood.

Interior Blocking:
2 5/8“ mill option wood lock blocks standard.

Core:
Expanded corrugated honeycomb core with maximum 5“ cells.

Faces:
High pressure decorative laminate general purpose grade (GP50 - .050“ thick) complying with NEMA standard LD-3.

Adhesive:
Type I or Type II bond, by specification, between faces and core/frame components. Formulated using no formaldehyde.

Assembly:
Frame components are stapled together and core is dropped into position.

Warranty:
Two years from date of manufacture. For original installation only.

PC/PC20
Particle Board Core
AWI: PC – HPDL – 3 or FD 1/3

Quality Standards:
Conforms to NWWDA Industry Standard I.S.-1 and Architectural Woodwork Institute section 1300-G-3 for FD 1/3, and ASTM E-152, Fire Test of Door Assemblies as performed by Warnock Hersey International.

Maximum Size:
Single Door: (unrated) 4/0 x 10/0

Single Door: (20 minute) 4/0 X 9/0, 3/0 X 10/0

Pairs: (unrated) 4/0 X 10/0, 8/0 X 10/0

Pairs: (20 minute) 4/0 X 9/0, 8/0 X 9/0 or 8/0 X 8/0

Double Egress: 8/0 X 9/0 with concealed vertical rod exit devices.

Thickness:
1 3/4" (±1/16")

Frame Components:
Stiles: (before trim or pre-fit) 1 3/8" structural composite lumber (SCL) or 1 3/8” mill option kiln-dried hardwood. Bonded to core.
Rails: (before trim or pre-fit) top and bottom 1¼" structural composite lumber (SCL) or 1¼” mill option kiln-dried hardwood. Bonded to core.

Interior Blocking:
In some applications the addition of optional solid wood interior blocking may be required due to fire rating and hardware specifications.

Core:
Wood particleboard door core to meet or exceed American National Standard ANSI A208.1 for I-LD-2 Door Core. Mat-formed particleboard with density approx. 28-32 pounds per cubic feet (pcf) to meet or exceed Commercial Standard CS 236-66 for Type 1 grade C, Class 1. Exceeds requirements for 20 minute construction authority.

Faces:
High pressure decorative laminate general purpose grade (GP50 - .050“ thick) complying with NEMA standard LD-3. Type II bond as specified.

Adhesive:
Type I or Type II bond, by specification, between faces and core/frame components. Formulated using no formaldehyde

Assembly:
Bonded core and frame assembly is uniformly sanded to a thickness of 1 1/2“ (+.015”). For FD 1/3, core and frame components are assembled to meet or exceed 20 minute specifications.

Warranty:
Lifetime from date of manufacture. For original installation only.

Label Authority:
For FD 1/3, may be labeled and classified by Warnock Hersey International as a 20 minute fire/smoke barrier. Restrictions on machining and architectural accessories or application are per that authority.

Application Exception:
Exterior application of this product requires specification of Type I optional adhesives for construction of all door components including faces. This application also requires additional architectural accessories and special finishes (see Architectural Accessories Details, section V), and reduces the warranty period from lifetime to two years.

*Fire labeled doors may not be refit in the field if already factory pre-fit or machine sized.

CPC/CPC20
Particle Board Core
AWI: PC – HPDL – 5 or FD 1/3

Quality Standards:
Conforms to NWWDA Industry Standard I.S. - 1 and Architectural Woodwork Institute section 1300-G-3 for FD 1/3, and ASTM E-152, Fire Test of Door Assemblies as performed by Warnock Hersey International.

Maximum Size:
Single Door: (unrated) 4/0 X 10/0

Single Door: (20 minute) 4/0 X 9/0, 3/0 X 10/0

Pairs: (unrated) 4/0 X 10/0, 8/0 X 10/0

Pairs: (20 minute) 4/0 X 9/0, 8/0 x 9/0

Double egress: (20 minute) 8/0 X 9/0 with concealed vertical rod exit devices.

Thickness:
1 3/4” (±1/16”)

Frame Components:
Stiles: (before trim or pre-fit) 1 3/8” structural composite lumber (SCL) or 1 3/8” mill option kiln-dried hardwood. Bonded to core.
Rails: (before trim or pre-fit) 1 3/8” structural composite lumber (SCL). Bonded to core.

Interior Blocking:
In some applications the addition of optional solid wood interior blocking may be required due to
fire rating and hardware specifications.

Core:
Wood particleboard door core to meet or exceed American National Standard ANSI/A208.1 for I-LD-2 Door Core. For FD 1/3, exceeds requirements for 20 minute construction authority.

Faces and Edges:
1/10“ hardboard or medium density fiberboard crossbanding meeting AWI or NWWDA grading rules as specified. High pressure decorative laminate general purpose grade (GP50 - .050” thick) complying with NEMA standard LD-3. Type II bond as specified.

Adhesive:
Type I or Type II bond, by specification, between faces and core/frame components. Formulated using no formaldehyde.

Assembly:
Bonded core and frame assemble is uniformly sanded to a thickness of 1 1/2” (±.015”). For FD 1/3, core and frame components are assembled to meet or exceed 20 minute specifications.

Warranty:
Lifetime from date of manufacture. For original installation only.

Label Authority:
For FD 1/3, may be labeled and classified by Warnock Hersey International as a 20 minute fire/smoke barrier. Restrictions on machining and architectural accessories or application are per that authority.

Application Exception:
Exterior application of this product requires specification of Type I optional adhesives for construction of all door components including faces. This application also requires additional architectural accessories and special finishes (see Architectural Accessories Details, section V), and reduces the warranty period from lifetime to two years.

*Fire labeled doors may not be refit in the field if already factory pre-fit or machine sized.

CPC/CPC20
Particle Board Core
AWI: PC – HPDL – 5 or FD 1/3

Quality Standards:
Conforms to NWWDA Industry Standard I.S. - 1 and Architectural Woodwork Institute section 1300-G-3 for FD 1/3, and ASTM E-152, Fire Test of Door Assemblies as performed by Warnock Hersey International.

Maximum Size:
Single Door: (unrated) 4/0 X 10/0

Single Door: (20 minute) 4/0 X 9/0, 3/0 X 10/0

Pairs: (unrated) 4/0 X 10/0, 8/0 X 10/0

Pairs: (20 minute) 4/0 X 9/0, 8/0 x 9/0

Double egress: (20 minute) 8/0 X 9/0 with concealed vertical rod exit devices.

Thickness:
1 3/4” (±1/16”)

Frame Components:
Stiles: (before trim or pre-fit) 1 3/8” structural composite lumber (SCL) or 1 3/8” mill option kiln-dried hardwood. Bonded to core.
Rails: (before trim or pre-fit) 1 3/8” structural composite lumber (SCL). Bonded to core.

Interior Blocking:
In some applications the addition of optional solid wood interior blocking may be required due to
fire rating and hardware specifications.

Core:
Wood particleboard door core to meet or exceed American National Standard ANSI/A208.1 for I-LD-2 Door Core. For FD 1/3, exceeds requirements for 20 minute construction authority.

Faces and Edges:
1/10“ hardboard or medium density fiberboard crossbanding meeting AWI or NWWDA grading rules as specified. High pressure decorative laminate general purpose grade (GP50 - .050” thick) complying with NEMA standard LD-3. Type II bond as specified.

Adhesive:
Type I or Type II bond, by specification, between faces and core/frame components. Formulated using no formaldehyde.

Assembly:
Bonded core and frame assemble is uniformly sanded to a thickness of 1 1/2” (±.015”). For FD 1/3, core and frame components are assembled to meet or exceed 20 minute specifications.

Warranty:
Lifetime from date of manufacture. For original installation only.

Label Authority:
For FD 1/3, may be labeled and classified by Warnock Hersey International as a 20 minute fire/smoke barrier. Restrictions on machining and architectural accessories or application are per that authority.

Application Exception:
Exterior application of this product requires specification of Type I optional adhesives for construction of all door components including faces. This application also requires additional architectural accessories and special finishes (see Architectural Accessories Details, section V), and reduces the warranty period from lifetime to two years.

*Fire labeled doors may not be refit in the field if already factory pre-fit or machine sized.

CPC45
Particle Board Core
AWI: FD 3/4

Quality Standards:
Conforms to NWWDA Industry Standard I.S. - 1 and Architectural Woodwork Institute section 1300-G-3 for FD 3/4, and ASTM E-152, Fire Test of Door Assemblies as performed by Warnock Hersey International.

Maximum Size:
Single Door: (45 minute) 4/0 X 7/2. No cutouts, flush only.

Thickness:
1 3/4” (±1/16”)

Frame Components:
Stiles: (before trim or pre-fit) 1 1/4” mill option kiln-dried hardwood. Bonded to core.
Rails: (before trim or pre-fit) 3“ mill option kiln-dried hardwood. Bonded to core.

Interior Blocking:
None acceptable for 45 minute rating.

Core:
Wood particleboard door core to meet or exceed American National Standard ANSI/A208.1 for I-LD-2 Door Core. Exceeds requirements for 45 minute construction authority.

Faces:
1/10“ hardboard or medium density fiberboard meeting AWI or NWWDA grading rules as specified. High pressure decorative laminate general purpose grade (GP50 - .050” thick) complying with NEMA standard LD-3. Type II bond as specified.

Adhesive:
Type I or Type II bond, by specification, between faces and core/frame components. Formulated using no formaldehyde.

Assembly:
Bonded core and frame assembly is uniformly sanded to a thickness of 1 1/2” (±.015”). Core and frame components are assembled to meet or exceed 45 minute specifications.

Label Authority:
May be labeled and classified by Warnock Hersey International as a 45 minute fire/smoke barrier. Restrictions on machining and architectural accessories or application are per that authority.

Application Exception:
Exterior application of this product requires specification of Type I optional adhesives for construction of all door components including faces. This application also requires additional architectural accessories and special finishes (see Architectural Accessories Details, section V), and reduces the warranty period from lifetime to two years.

*Fire labeled doors may not be refit in the field if already factory pre-fit or machine sized.

MC45
C Label 45 Minute Fire Door
AWI: FD 3/4

Quality Standards:
Conforms to NWWDA Industry Standard I.S.-1, and Architectural Woodwork Institute section 1300-G-4 for type FD 3/4, and ASTM E -152, Fire Test of Door Assemblies as performed by Warnock Hersey International.

Maximum Size:
Single Door: 4/0 x 10/0, 3/0 X 10/0 with transom.

Pairs: 8/0 X 9/0

Double egress: 8/0 X 8/0.

Metal edge and astragal required on pairs.

Thickness:
1 3/4” (±1/16”)

Frame Components:
Stiles: (before trim or pre-fit) 1” hardwood untreated or clear fir with a minimum density of 28.75 pounds per cubic feet (pcf) or other species having equal density. Bonded to the core.
Rails: (before trim or pre-fit)
     Top: 1” untreated hardwood or clear fir with a minimum of 28.75 pcf or other species having an equal density. Bonded to the core.
    Bottom: 2” hardwood with minimum density of 28.75 pcf or other species having equal density. Bonded to the core.

Interior Blocking:
In some applications the addition of optional Firestop composition may be required due to fire rating and hardware specifications.

Core:
Georgia Pacific homogenous gypsum type mineral substance with minimum density of 26 pounds per cubic foot.

Faces:
1/10“ hardboard or medium density fiberboard cross banding meeting AWI or NWWDA grading rules as specified. Type II bond between plys as

Adhesive:
Type I or Type II bond, by specification, between faces and core/frame components. Formulated using no formaldehyde.

Assembly:
Core and frame component are bonded per Warnock Hersey manufacturing authorities and sanded to a uniform thickness of 1 1/2” (+ .015”).

Warranty:
Lifetime from date of manufacture. For original installation only.

Label Authority:
Labeled and classified by Warnock Hersey International as a 45 minute fire barrier in sizes as described above with vision panels only having an aggregate area of 1296 square inches maximum either singularly or in multiples.

*Fire labeled doors may not be refit in the field if already factory pre-fit or machine sized.

MC60
B Label 60 Minute Fire Door
AWI: FD 1

Quality Standards:
Conforms to NWWDA Industry Standard I.S.-1 and Architectural Woodwork Institute section 1300-G-4 for type FD 1, and ASTM E-152, Fire Test of Door Assemblies as performed by Warnock Hersey International.

Maximum Size:
Single Door: 4/0 X 10/0, 3/0 X 10/0 with transom (3/0 X 3/0 maximum transom. Must be preinstalled with transom bar if rabbet joint not used.)

Pairs: 4/0 X 9/0, 8/0 X 9/0.

Double egress: 8/0 X 8/0. Construction of door accessories by specification.

Thickness:
1 3/4” (± 1/16”)

Frame Components:
Stiles: (before trim or pre-fit) 1“ width Firestop composition. Bonded to the core.
Rails:
     Top: 1” Firestop composition. Bonded to the core.
     Bottom: 2” Firestop composition. Bonded to the core.

Interior Blocking:
In some applications, the addition of optional Firestop composition may be required due to fire rating and hardware specifications.

Core:
Georgia Pacific homogenous gypsum type mineral substance with minimum density of 26 pounds per cubic foot.

Faces:
1/10“ hardboard or medium density fiberboard crossbanding meeting AWI or NWWDA grading rules as specified. Type II bond between plys as specified with high pressure decorative laminate general purpose grade (GP50 - .050” thick) complying with NEMA standard LD-3

Adhesive:
Type II bond, by specification, between faces and core/frame

Assembly:
Core and frame component are bonded per Warnock Hersey manufacturing authorities and sanded to a uniform thickness of 1 1/2” (+ .015”).

Warranty:
Lifetime from date of manufacture. For original installation only.

Label Authority:
Labeled and classified by Warnock Hersey International as a 60 minute fire barrier in sizes as described above with vision panels having aggregate areas of 100 square inches either singularly or in multiples, or fusible link louvers having aggregate areas of 576 square inches either singularly or in multiples.

*Fire labeled doors may not be refit in the field if already factory pre-fit or machine sized.

MC90
B Label 90 Minute Fire Door
AWI: FD 1 1/2

Quality Standards:
Conforms to NWWDA Industry Standard I.S.-1 and Architectural Woodwork Institute section 1300-G-4 for type FD 1 1/2, and ASTM E-152, Fire Test of Door Assemblies as performed by Warnock Hersey International.

Maximum Size:
Single Door: 4/0 X 10/0, 3/0 X 10/0 with transom (3/0 X 3/0 maximum transom). Must be preinstalled with transom bar if rabbet joint not used.

Pairs: 4/0 X 9/0, 8/0 X 9/0

Double egress: 8/0 X 8/0. Construction of door accessories by specification.

Thickness:
1 3/4” (+ 1/16”)

Frame Components:
Stiles: (before trim or pre-fit) 1 1/2” width Firestop composition. Bonded to the core.
Rails:
     Top: 1” Firestop composition. Bonded to the core.
     Bottom: 2” Firestop composition. Bonded to the core.

Interior Blocking:
In some applications, the addition of optional Firestop composition may be required due to fire rating and hardware specifications.

Core:
Georgia Pacific homogenous gypsum type mineral substance with minimum density of 26 pounds per cubic foot.

Faces:
1/10“ hardboard or medium density fiberboard meeting AWI or NWWDA grading rules as specified. Type II bond between plys as specified with high pressure decorative laminate general purpose grade (GP50 - .050” thick) complying with NEMA standard LD-3.

Adhesive:
Type II bond, by specification, between faces and core/frame components. Formulated using no formaldehyde.

Assembly:
Core and frame component are bonded per Warnock Hersey manufacturing authorities and sanded to a uniform thickness of 1 1/2” (+ .015”).

Warranty:
Lifetime from date of manufacture. For original installation only.

Label Authority:
Labeled and classified by Warnock Hersey International as a 90 minute fire barrier in sizes as described above with vision panels having aggregate areas of 100 square inches either singularly or in multiples, or fusible link louvers having aggregate areas of 576 square inches either singularly or in multiples.

*Fire labeled doors may not be refit in the field if already factory pre-fit or machine sized.

LL
Lead Lined
AWI: LL - HPDL

Quality Standards:
Conforms to NWWDA Industry Standard I.S.1, and Architectural Woodwork Institute section 1300-G-3 and 1300-G-4 for type PC7 or FD 1/3, and ASTM E-152, Fire Test of Door Assemblies as performed by Warnock Hersey International.

Maximum Size:
Single Door: 4/0 X 7/0

Thickness:
1 3/4” (± 1/16”)

Frame Components:
Stiles: (before trim or pre-fit) 1 1/2” mill option kiln-dried hardwood. Bonded to the core.
Rails: (before trim or pre-fit) 1 1/2“ kiln-dried hardwood. Bonded to the core.

Interior Blocking:
Not applicable.

Hinges:
4 ½“ x 4 ½” x 0.134” min. or per NFPA #80

Vision Panels:
Maximum lite size 20 minute, no more than 1296 sq. in.

Core:
1/16“ thick lead sheet, full width of core, sandwiched and boned to AB grade exterior plywood and securely fastened with lead bolts.

Faces:
High pressure decorative laminate general purpose grade (GP50 - .050“ thick) complying with NEMA standard LD-3.

Adhesive:
Type I or Type II bond, by specification, between faces and core/frame components. Formulated using no formaldehyde.

Assembly:
Core and frame components are bonded and uniformly sanded to a thickness of 1 ½“ (± .015). For FD 1/3, core and frame components are assembled to meet or exceed 20 minute specifications.

Warranty:
Lifetime from date of manufacture. For original installation only.

Label Authority:
Labeled and classified by Warnock Hersey International as a 20 minute fire/smoke barrier. Restrictions on machining and architectural accessories or application are per that authority.

*Fire labeled doors may not be refit in the field if already factory pre-fit or machine sized.