The McGraw-Hill Companies
McGraw Hill Construction - Building Materials, Products and Manufacturers
home |
product centers
| find a rep |
utilities
| education | project network | SNAP Reader Service | forums
Follow us on Twitter
register | forgot password | remember me | help
 
MasterFormat   help
 
Product Center Image
minus gif downloads and resources
 |   |   | 


Advance Lifts, Inc.
701 S. Kirk Road
St. Charles, IL 60174-3428
Toll Free: (800) 843-3625
Tel: (630) 584-9881
Fax: (630) 584-9405
E-mail: sales@advancelifts.com
Web site: http://www.advancelifts.com


SELECT AN ADVANCE DOCK LIFT

DID YOU KNOW?
  • The most popular wooden pallet is 40 inches wide so that two can be put in a truck side by side.
  • Cushion tire fork trucks to 8,000 lb. capacity are generally less than 48 inches wide.
  • Pneumatic tire fork trucks to 8,000 lb. capacity are generally less than 60 inches wide.
  • A 6 foot wide platform is generally adequate to handle most normal loading situations.


DESIGN CRITERIA

Platform Width: Equals the width of the widest load plus 12 inches minimum for operating clearance with hand rails.

Platform Length: Equals the length of the longest load plus the length of any material handling equipment which may project beyond the load plus room for the operator, if required.
  • A 7 foot length is adequate for loads transferred via manual pallet jacks.
  • A 10 foot length should be used for loads transferred via powered pallet jacks.
  • A 12 foot length should be used for loads transferred via sit down rider fork trucks.

Bridge Width: 72" is the maximum recommended width to avoid truck alignment problems. Other widths are available.

Bridge Length: The bridge should be long enough so it projects 4-6" beyond any truck bumpers to provide adequate purchase on the truck bed. 12" is the minimum recommended length.


SELECT AN ADVANCE LOADING DOCK

INSTRUCTIONS

Lifting Capacity: Add weight of the Load + Weight of Transport Vehicle + Weight of Personnel.

Axle Capacity: From the "X" Chart: Determine the type of Axle Loading. On the "Y" Chart: Locate the Lifting Capacity required. Follow across to the graph line (A, B, C, or D) which represents the appropriate Axle Loading Conditions and follow down to the Axle Capacity required.

Example: Load Weighs 4,000 lbs.
Ford Truck Weighs 7,300 lbs.
Operator Weighs 200 lbs.
Total Load and Lifting Capacity
Required 11,500 lbs.
Type of Axle Loading "C" (Fork Truck)
Axle Capacity Required 9,200 lbs.

Note: If the Dock Lift selected has the Lifting Capacity required, but not the Axle Loading Capacity required, select another Dock Lift which has a higher Lifting Capacity with an Axle Loading Capacity equal to the needs of the application.




 |   |   |