Advance Lifts, Inc.
701 S. Kirk Road
St. Charles, IL 60174-3428
Toll Free: (800) 843-3625
Tel: (630) 584-9881
Fax: (630) 584-9405
E-mail: sales@advancelifts.com
Web site: http://www.advancelifts.com
Advance offers a wide variety of optional accessories to help tailor
a lift to your specific requirements. In addition to special bridge sizes,
approach ramps for pit mounted lift models installed on top of the ground,
warning lights and bells, different power voltages and oil immersion heaters,
Advance also offers the following:
Electric Toe Guards — An optional safety device for pit mounted
lifts, beyond the federally required 8" bevel toe guards, which stops the
platform’s downward travel when it encounters an obstacle. Simply pushing
the "UP" button on the control station raises the platform so the object
can be removed and the system reset. Electric Toe Guards can be installed
on any or all of the platform sides. Its hinged actuator projects down
and away from the rigid platform toe guard, rather than hanging directly
beneath it. Electric Toe Guards can act as an emergency down travel stop
switch for anyone within arm’s reach of the platform, providing added electronic
protection.
Wheel Chock — A device to prevent loads from rolling off the platform
in any but the fully lowered position. Chock ramps are standard on models
1035, 1045, 1055, 6100, and 6150.
Limit Switch — This adjustable limit switch stops the lift’s upward
travel at a preset level. To avoid electric lines in the pit, it should
only be used where the platform must stop at the same elevation every time.
Night Locks — These non-load supporting bars on the four platform
corners secure the platform at dock level. They swivel 360 degrees so they
can be positioned over the edge of a concrete dock to mechanically lock
the lift in a raised position for security purposes. They are not load
supporting devices and are ordered in lieu of hand rails, which are not
required in a raised concrete loading dock application.
Controls — Weatherproof pendant push button (standard), wall mount
push button, key operated up-down selector switch, up-down push button
with key lockout.
Quick Disconnect — The push button control can be plugged into
a receptacle box on the lift. Other variations are available.
To avoid potential injuries, the bridge activator eliminates repeated
handling of the hinged bridge. Simply adjust the height of the activator
to 3" below the truck bed and lean the bridge against the activator. As
the lift raises or lowers, the bridge cams over the activator bar onto
or off of the truck bed.
ITEM ABA-GS3 — For use at ground level installations
ITEM ABA-DS1 — For use at loading docks 30" and higher with the
dock lift mounted on top of the dock surface
ITEM ABA-DR2 — For use on loading docks 30" and higher with the
dock lift recessed into a pit on top of the dock
|