|   |   | 

Door Finishes & Textures

Door Finishes & Textures

The RITE Door® can be finished in a huge pallet of colors and laminate textures or pre-finished to match existing paints.

For painted finishes, The RITE Door is treated after dressing to insure maximum paint adhesion. Call Adams Rite for custom coloring, textures or treatments.

  • Primed for Paint Standard
  • Pre-Finish Tnemec Paint
  • Plastic Laminate (HPL)
  • Metallic Laminates
  • Mirrored Stainless Steel
  • Brushed Stainless Steel

Plastic Laminate (HPL) Door Faces

  • Adams Rite Manufacturing will only warranty HPL applied to doors with Honeycomb or temperature rise cores.
  • HPL steel doors are not recommended and not warranted for exterior use.
  • When moving plastic laminate steel doors, carry them. Never drag one across another. Carts and other equipment used to handle these doors must be padded.
  • Conditioning of High Pressure Laminate (HPL) steel doors:
    • The High Pressure Laminate and the steel door react differently to temperature changes (contraction and expansion), which can cause the laminate to crack, especially on doors with vision lights.
    • Do not deliver or install High Pressure Laminated steel doors until conditions for temperature and relative humidity have been stabilized and will be maintained in the storage and installation areas during the remainder of construction period.
  • Plastic Laminate (HPL) steel doors should be installed just prior to substantial completion to avoid damage.
  • Refer to proper delivery, receiving, on-site storage and installation guidelines for hollow metal doors as per current NAAMM Standard HMMA 840 – no exterior storage.
  • Adams Rite Manufacturing will not warranty or assume any responsibility for doors not handled per these recommended procedures.


Door Finishes & Textures

Exit Device Finishes

Exit Devices for The Rite Door® come in an attractive range of architectural finishes for the pushbar. Finishes are anodized or clad, not plated, for superior looks and wear.

The end caps are Black Metal, but can be ordered to match the pushbar, for an even more seemless appearance. Call Adams Rite for custom finishes.


Door Finishes & Textures

  • US3 - Bright Brass
  • US4 - Satin Brass
  • US9 - Bright Bronze
  • US10 - Satin Bronze
  • US32 - Bright Stainless
  • US32D - Satin Stainless
  • 313 - Bronze Anodized
  • 335 - Black Anodized
  • 628 - Clear Anodized
  • CHP - Champagne Anodized

ADAMS RITE Manufacturing
260 Santa Fe Street
Pomona, CA 91767
Phone: (800) 87-ADAMS - (800) 872-3267
Fax: (800) 232-7329 - (909) 632-2370
Email: sales@adamsrite.com
Website: http://www.adamsrite.com
 |   |   |