Architectural Metal Roof
Systems
ATAS International, Inc.
Corporate Headquarters:
Allentown, PA
Western Facility:
Mesa, AZ
Southern Facility:
Maryville, TN
Toll-Free: (800) 468-1441
Tel: (610) 395-8445
Fax: (610) 395-9342
E-mail: info@atas.com
Web site: http://www.atas.com
Product Presentation
ATAS International Inc. offers eleven distinct and stylish metal roofing
systems that are applicable for both commercial and residential applications.
ATAS’ product line includes: traditional standing seam panels (Dutch
Seam, Monarch, PC Snap-On System, Field-Lok, and Standing Seam Shingle);
simulated tiles including a Northern European tile (ScanRoof), a
Spanish tile (Techo Tile), and a stone coated tile (Granutile),
a simulated wood shake (Permashake), a diamond shaped shingle (CastleTop),
and a dimensional shingle (ADVANTA).
For detailed product specifications, please refer to the specific
product profile, listed above in bold type, on this CD.
Structural Systems
The advantage of metal roofing is its strength and durability. Several
of ATAS’ metal roof systems are structural in nature; therefore, they can
be installed over open framing or purlins. The lightweight and high load
bearing properties of the structural metal roof systems allow maximum spacing
between trusses and/or reduction of roof truss dimensions.
Selection
Carrying an inventory of over six million pounds of prepainted coil
stock, ATAS has a color to meet your design expectations. Twenty-seven
(27) standard colors in a high performance, Kynar 500® or Hylar 5000®
based, finish are backed by a twenty-year limited warranty. If a non-standard
color is requested, it can be provided, subject to availability, order
size and extended lead-time. ATAS also carries touch-up paint for each
color.
For detailed product specifications, please refer to the specific
product profile, listed above in bold type, on this CD.
Quality
All ATAS systems have undergone extensive testing: wind uplift, fire
rating, water and air filtration, and various local building code acceptances.
Class A and B fire ratings are achieved depending on the substrate. ScanRoof,
Monarch, Multi-Purpose and PC Systems have met and surpassed the rigid
requirements of the UL580 test procedure to receive the UL90 rating for
wind uplift. In this test, all aspects of the roof system are evaluated,
from the roof deck or sub-purlins, anchor clips and fasteners, as well
as the metal panel itself. Load tables are available upon request. Further,
ATAS’ 11" Dutch Seam panel, MRD110, in .040 aluminum, has been accepted
and approved by the U.S. Government Corps of Engineers Guidelines (CEGS
07416). Due to the wide variety of the panel systems and assemblies, it
is not feasible to publish each individual report. ATAS’ support team will
provide information on the compliance of these ratings to the method of
construction on a particular project. The Engineer and/or Architect must
verify that the roof design will meet the requirements for all local codes.
Affiliations & Services
To be able to provide information on a 24-hour basis, ATAS has developed
a catalog by Fax program through Thomas Register. To access information,
call 1-800-4-FAXCAT, follow the prompt, give the code number for the product
of interest, and pertinent information is sent directly to the inquirer’s
Fax machine.
Additionally, you can access complete product information and detailed
3-part industry standard product specifications on line at www.atas.com
ATAS International, Inc. is a member of the following organizations
which promote the use of metal in construction:
MRA - Metal Roofing Alliance
AISI - American Iron and Steel Institute
NCCA - National Coil Coaters Association
MCA - Metal Construction Association
NRCA - National Roofing Contractors Association
NAHB - National Association of Home Builders
Kynar 500® is a registered trademark of Elf Atochem North America,
Inc.
Hylar 5000® is a registered trademark of Ausimont USA, Inc.
|